AT25DF161-MH-T

IC FLASH 16Mbit 100MHz 8UDFN

Description

The AT25DF161 is a serial interface Flash memory device designed for use in a wide variety of high-volume consumer based applications in which program code is shad owed from Flash memory into embedded or external RAM for execution.

Features

• Single 2.7V - 3.6V Supply

• Serial Peripheral Interface SPI Compatible

– Supports SPI Modes 0 and 3

– Supports RapidS Operation

– Supports Dual-Input Program and Dual-Output Read

• Very High Operating Frequencies

– 100 MHz for RapidS

– 85 MHz for SPI

– Clock-to-Output tV of 5 ns Maximum

• Flexible, Optimized Erase Architecture for Code + Data Storage Applications

– Uniform 4-Kbyte Block Erase

– Uniform 32-Kbyte Block Erase

– Uniform 64-Kbyte Block Erase

– Full Chip Erase

• Individual Sector Protection withGlobal Protect/Unprotect Feature

– 32 Sectors of 64-Kbytes Each

• Hardware Controlled Locking of Protected Sectors via WPPin

• Sector Lockdown

– Make Any Combination of 64-Kbyte Sectors Permanently Read-Only

• 128-Byte Programmable OTP Security Register

• Flexible Programming

– Byte/Page Program 1 to 256 Bytes

• Fast Program and Erase Times

– 1.0 ms Typical Page Program 256 Bytes Time

– 50 ms Typical 4-Kbyte Block Erase Time

– 250 ms Typical 32-Kbyte Block Erase Time

– 400 ms Typical 64-Kbyte Block Erase Time

• Program and Erase Suspend/Resume

• Automatic Checking and Reporting of Erase/Program Failures

• Software Controlled Reset

• JEDEC Standard Manufacturer and Device ID Read Methodology

• Low Power Dissipation

– 5 mA Active Read Current Typical at 20 MHz

– 5 µA Deep Power-Down Current Typical

• Endurance: 100,000 Program/Erase Cycles

• Data Retention: 20 Years

• Complies with Full Industrial Temperature Range

• Industry Standard Green Pb/Halide-free/RoHS Compliant Package Options

– 8-lead SOIC 150-mil and 208-mil wide

– 8-pad Ultra Thin DFN 5 x 6 x 0.6 mm