EPCOS B57237S0150M000 热敏电阻,NTC
The is a 2-pin NTC Thermistor with kinked leads of tinned copper wire and coated thermistor disk. This B57237S0 series thermistor is useable in series connections up to 265Vrms. It is marked with manufacturer"s logo, NTC and resistance value stamped on. A lead wire may be bent at a minimum distance of twice the wire"s diameter plus 4mm from the component head or housing. When bending ensure the wire is mechanically relieved at the component head or housing. The bending radius should be at least 0.75mm. Twisting torsion by 180° of a lead bent by 90° is permissible at 6mm from the bottom of the thermistor body. Soldering can use resin-type flux or non-activated flux. The soldering due to insufficient preheating may cause ceramic cracks. Suitable for inrush current limiting, switch-mode power supplies and soft-start motors e.g. in vacuum cleaners.
Avoid contamination of thermistors surface during storage, handling and processing. Do not touch components with bare hands. Washing process may damage due to possible static/cyclic mechanical loads.
The self-heating of a thermistor during operation depends on the load applied and the applicable dissipation factor. Gloves are recommended.
容差 20 %
电阻 15 Ω
阻值偏差 ±20 %
工作温度Max 170 ℃
工作温度Min -55 ℃
安装方式 Through Hole
引脚数 2
宽度 7 mm
直径 15.0 mm
脚长度 25.0 mm
厚度 7.00 mm
工作温度 -55℃ ~ 170℃
产品生命周期 Active
包装方式 Bulk
制造应用 Safety, Power Management, Motor Drive & Control
RoHS标准 RoHS Compliant
含铅标准 Lead Free
REACH SVHC标准 No SVHC
REACH SVHC版本 2015/06/15
型号/品牌 | 代替类型 | 替代型号对比 |
---|---|---|
B57237S0150M000 Epcos 爱普科斯 | 当前型号 | 当前型号 |
B57237S150M 爱普科斯 | 类似代替 | B57237S0150M000和B57237S150M的区别 |