BQ2003PN-N

NiCd/NiMH 电池充电控制器，Texas Instruments### 电池管理，Texas Instruments

NiCd/NiMH 电池充电控制器，Texas Instruments

### 电池管理，Texas Instruments

欧时:
### NiCd/NiMH 电池充电控制器，Texas Instruments### 电池管理，Texas Instruments

得捷:
IC BATT CONTRL MULTI-CHEM 16DIP

立创商城:
BQ2003PN-N

德州仪器TI:
Switch-mode NiCd/NiMH battery charger with negative dV and dT/dt termination

艾睿:
Monitor the state of your batteries with fast charge management BQ2003PN-N charge controller from Texas Instruments. Its typical operating supply voltage is 5 V. Its output produces a current of 2000Min mA. With an output that has a voltage of 0 to 5.5 V, this is power management at its best. In order to ensure parts aren&s;t damaged by bulk packaging, this product comes in tube packaging to add a little more protection by storing the loose parts in an outer tube. This device runs on NiCD|NiMH. This battery gauge has a minimum operating temperature of 0 °C and a maximum of 70 °C. This device has a typical operating supply voltage of 5 V. Its minimum operating supply voltage of 4.5 V, while its maximum is 5.5 V.

安富利:
Fast Charge Management NiCD/NiMH 2000mA 0V to 5.5V 16-Pin PDIP Tube

Chip1Stop:
Battery Charge Management Switch-mode NiCd/NiMH Battery Charger with Negative dV and dT/dt Termination Fast Charge Management NiCD/NiMH 2000mA 0V to 5.5V 16-Pin PDIP Tube

Verical:
Switching Battery Charger NiCd/NiMH 2000mA 0V to 5.5V 16-Pin PDIP Tube

Newark:
# TEXAS INSTRUMENTS  BQ2003PN-N  Battery Charger for 4 Cells of NiCd, NiMH battery, 5.5V input, 2 A charge, DIP-16

DeviceMart:
IC CONTROLLER FASTCHRGE 16DIP