Breakout电子板, Laird DVK-BL600 开发电子板
The is a breakout board with integrated coin cell holder and Laird FTDI USB-UART bridge board for BL600 modules. The breakout board has BL600-SA-07 module soldered on and exposes all available hardware interfaces. This is the only breakout board package that is supplied with Laird FTDI USB-UART bridge board which allows BL600 series module to physically connect to a PC for ease development. The Laird FTDI USB-UART bridge board provides USB to virtual COM port conversion through a FTDI chip. This breakout boards provides a platform for rapid wireless connectivity prototyping, providing multiple options for the development of Bluetooth Low Energy BLE applications based on Laird"s BL600 BTv4.0 single mode modules. It is power by regulated 3.3V into J3 pin3, generated by Laird FTDI board from USB PC, coin-cell battery holder fits CR1632, J2 fitted on underside of BA600 breakout board and 1.8V to 3.6V range through J4 plated through hole power supply options.
- .
- UART access via J3 and Laird USB to UART FTDI bridge board
- .
- Jumpers used to configure nAutoRUN [SIO_28] and vSP [SIO_7]
- .
- Analogue input sensing with optional resistive divider R4 and R5
- .
- Features smartBASIC FW upgrade capability, via UART using the Laird FTDI USB-UART bridge board
- .
- Features smartBASIC application loading capability