BQ2012SN-D107

NiCd/NiMH1线制,6LED驱动器,慢速充电电池能量监测器

电池监测/燃料表，Texas Instruments

电池充电监控系统是负责确定电池中剩余电量的元件。 它可以提供信息，如剩余电池容量 mAh、充电状态 % 和电池电压 mV。 其最大程度减少对主机处理器的依赖，并提高待机功率。

安全保护，如过压/欠​温、过压/欠压额外级别、放电短路、充电过电流

每隔 1 秒自主测量所有电池电压、集成包电流和温度

容量指示，带高级算法

准确的电池健康状况 SOH 有助于准确预测可用容量

智能充电和适应性

### 电池管理，Texas Instruments

得捷:
IC BATTERY GAS GAUGE 16-SOIC

德州仪器TI:
NiCd/NiMH gas gauge with 1-wire DQ interface, 5 LED drivers and Slow-charge Control

欧时:
Texas Instruments BQ2012SN-D107 镍镉、镍氢 电池电量计 IC, 4.25 V, 16引脚 SOIC封装

贸泽:
电池管理 NiCd/NiMH Gas Gauge

艾睿:
This gas gauge BQ2012SN-D107 charge controller from Texas Instruments is made up of integrated circuits that perform functions to help keep your batteries running smoothly. Its typical operating supply voltage is 4.25 V. In order to ensure parts aren&s;t damaged by bulk packaging, this product comes in tube packaging to add a little more protection by storing the loose parts in an outer tube. This device runs on NiCD|NiMH. This device has a typical operating supply voltage of 4.25 V. Its minimum operating supply voltage of 3 V, while its maximum is 6.5 V. This battery gauge has an operating temperature range of 0 °C to 70 °C.

安富利:
Gas Gauge NiCD/NiMH 16-Pin SOIC

Chip1Stop:
Battery Fuel Gauge NiCd/NiMH Gas Gauge With 1-Wire DQ Interface, 5 LED Drivers And Slow-Charge Control Gas Gauge NiCD/NiMH 16-Pin SOIC Tube

Verical:
Fuel Gauge NiCd/NiMH 16-Pin SOIC Tube

力源芯城:
NiCd/NiMH1线制,6LED驱动器,慢速充电电池能量监测器