TEXAS INSTRUMENTS CD4066BMT 模拟开关, 四通道, SPST, 4 放大器, 240 ohm, 3V 至 18V, SOIC, 14 引脚
The is a single-pole single-throw SPST CMOS quad bilateral Analog Switch intended for the transmission or multiplexing of analog or digital signals. It is pin-for-pin compatible with the CD4016B, but exhibits a much lower on-state resistance. In addition, the on-state resistance is relatively constant over the full input-signal range. The CD4066B consists of four bilateral switches, each with independent controls. Both the p and the n device in a given switch are biased on or off simultaneously by the control signal. The well of the n-channel device on each switch is tied to either the input when the switch is on or to VSS when the switch is off. This configuration eliminates the variation of the switch-transistor threshold voltage with input signal and, thus, keeps the on-state resistance low over the full operating-signal range.
输出接口数 4
通道数 4
针脚数 14
位数 4
电压波节 5.00 V, 10.0 V, 15.0 V
带宽 40.0 MHz
输入数 4
工作温度Max 125 ℃
工作温度Min -55 ℃
电源电压 3V ~ 18V
安装方式 Surface Mount
引脚数 14
封装 SOIC-14
封装 SOIC-14
工作温度 -55℃ ~ 125℃
产品生命周期 Active
包装方式 Tape & Reel TR
制造应用 工业, 信号处理, 通信与网络
RoHS标准 RoHS Compliant
含铅标准 Lead Free
REACH SVHC标准 No SVHC
REACH SVHC版本 2015/06/15
ECCN代码 EAR99
型号/品牌 | 代替类型 | 替代型号对比 |
---|---|---|
CD4066BMT TI 德州仪器 | 当前型号 | 当前型号 |
CD4066BM96 德州仪器 | 完全替代 | CD4066BMT和CD4066BM96的区别 |
CD4066BM 德州仪器 | 类似代替 | CD4066BMT和CD4066BM的区别 |
CD4052BPWR 德州仪器 | 功能相似 | CD4066BMT和CD4052BPWR的区别 |