1206 型 CRG1206 表面安装系列厚膜电阻器 CRG 系列具有高功率尺寸比,特别适用于工业和一般用途。 1Ω 至 10M 范围,1% 和 5% 容差,包括 0Ω 链路。 由于短引线结构和低电容,适用于大多数应用,包括高频操作。 七种封装尺寸 接线端子表面:无光泽锡 湿度敏感性等级:2 级 70°C 时功率 | 0.25W ---|--- 电阻容差 | ±1% 温度系数 | ±100ppm/°C 工作温度 | -55°C → +125°C 极限元件电压 | 200V 跳线芯片电阻 | 50mΩ(最大值) 70°C 时电流 | 2A 尺寸(长x宽x厚) | 3.1 x 1.55 x 0.55 mm ### 厚膜 - 1206
1206 型 CRG1206 表面安装系列
厚膜器 CRG 系列具有高功率尺寸比,特别适用于工业和一般用途。
1Ω 至 10M 范围,1% 和 5% 容差,包括 0Ω 链路。
由于短引线结构和低电容,适用于大多数应用,包括高频操作。
七种封装尺寸
接线端子表面:无光泽锡
湿度敏感性等级:2 级
欧时:
### 1206 型 CRG1206 表面安装系列厚膜电阻器 CRG 系列具有高功率尺寸比,特别适用于工业和一般用途。 1Ω 至 10M 范围,1% 和 5% 容差,包括 0Ω 链路。 由于短引线结构和低电容,适用于大多数应用,包括高频操作。 七种封装尺寸 接线端子表面:无光泽锡 湿度敏感性等级:2 级 70°C 时功率 | 0.25W ---|--- 电阻容差 | ±1% 温度系数 | ±100ppm/°C 工作温度 | -55°C → +125°C 极限元件电压 | 200V 跳线芯片电阻 | 50mΩ(最大值) 70°C 时电流 | 2A 尺寸(长x宽x厚) | 3.1 x 1.55 x 0.55 mm ### 厚膜 - 1206
得捷:
RES SMD 0 OHM JUMPER 1/4W 1206
艾睿:
The CRG1206ZR fixed single surface-mount resistor from TE Connectivity makes it easy to add resistors to your circuit board. This product has a resistance value of 0 Ohm. This component will be shipped in tape and reel packaging for effective mounting and safe delivery. This product is 3.1 mm long, 0.55 mm tall and 1.55 mm deep. This part has an operating temperature of -55 to 125 °C. This device utilizes thick film technology.
Allied Electronics:
Resistor; Thick Film; Res 0 Ohms; Pwr-Rtg 0.25 W; Tol Jumper; SMT; 1206
安富利:
Res Thick Film 1206 0 Ohm Jumper Molded SMD T/R
Verical:
Res Thick Film 1206 0 Ohm Molded SMD T/R
Electro Sonic:
Res Thick Film 1206 0 Ohm Molded SMD T/R
型号/品牌 | 代替类型 | 替代型号对比 |
---|---|---|
CRG1206ZR TE Connectivity 泰科 | 当前型号 | 当前型号 |
WCR1206-R005JI TT Electronics/Welwyn | 功能相似 | CRG1206ZR和WCR1206-R005JI的区别 |
MCU08050Z0000ZP5 Vishay Beyschlag | 功能相似 | CRG1206ZR和MCU08050Z0000ZP5的区别 |
WCR0805R005JI TT Electronics/Welwyn | 功能相似 | CRG1206ZR和WCR0805R005JI的区别 |