TEXAS INSTRUMENTS DS90CP22M-8 总线, CAN, 3 V, 3.6 V, SOIC
The is a 2x2 Cross-point Switch utilizing LVDS low voltage differential signalling technology for low power, high speed operation. Data paths are fully differential from input to output for low noise generation and low pulse width distortion. The non-blocking design allows connection of any input to any output or outputs. LVDS I/O enable high speed data transmission for point-to-point interconnects. This device can be used as a high speed differential cross-point, 2:1 mux, 1:2 demux, repeater or 1:2 signal splitter. The mux and demux functions are useful for switching between primary and backup circuits in fault tolerant systems. The 1:2 signal splitter and 2:1 mux functions are useful for distribution of serial bus across several rack-mounted backplanes. The DS90CP22 accepts LVDS signal levels, LVPECL levels directly or PECL with attenuation networks. The individual LVDS outputs can be put into TRI-STATE by use of the enable pins.
Device has limited built-in ESD protection. The leads should be shorted together or the device placed in conductive foam during storage or handling to prevent electrostatic damage to the MOS gates.
电源电压DC 3.00V min
触点类型 DPDT
供电电流 98 mA
针脚数 16
数据速率 800 Mbps
工作温度Max 85 ℃
工作温度Min -40 ℃
电源电压 3V ~ 3.6V
电源电压Max 3.6 V
电源电压Min 3 V
安装方式 Surface Mount
引脚数 16
封装 SOIC-16
封装 SOIC-16
工作温度 -40℃ ~ 85℃
产品生命周期 Active
包装方式 Each
RoHS标准 Non-Compliant
含铅标准 Contains Lead
REACH SVHC标准 No SVHC
REACH SVHC版本 2015/06/15
ECCN代码 5A991.b.1
型号/品牌 | 代替类型 | 替代型号对比 |
---|---|---|
DS90CP22M-8 TI 德州仪器 | 当前型号 | 当前型号 |
DS90CP22M-8/NOPB 德州仪器 | 完全替代 | DS90CP22M-8和DS90CP22M-8/NOPB的区别 |
SN65LVCP22D 德州仪器 | 完全替代 | DS90CP22M-8和SN65LVCP22D的区别 |
DS90CP22MX-8/NOPB 德州仪器 | 完全替代 | DS90CP22M-8和DS90CP22MX-8/NOPB的区别 |