LTC3639EMSE DC to DC Converter and Switching Regulator Chip 1.764VDC to 1.836VDC/3.234VDC to 3.366VDC/4.9VDC to 5.1VDC Output Demonstration Circuit
The is a demonstration board featuring LTC3639EMSE device. The LTC3639EMSE is a high efficiency step down DC to DC regulator with internal high side and synchronous power switches that draws only 12µA typical DC supply current while maintaining a regulated output voltage at no load. The IC operates in a high efficiency burst mode operation and includes internal high and low side power MOSFETs. The board will accept input voltage between 4V and 150V and provide jumper selected output voltages of 1.8V, 3.3V, 5V and an option for additional voltages. The IC includes internal soft start and a provision for increasing soft start time. Included on the board is an ON/OFF jumper that can also be configured as a precision undervoltage lockout. Additional PC pads are included for programming current limit to optimize efficiency and for reducing output voltage ripple and reducing component size. A terminal is included to allow multiple boards to be paralleled for higher output current.
Be careful when testing with high voltage. High voltage can result in an electric shock if care is not taken.