TEXAS INSTRUMENTS DS26C31TMX/NOPB 芯片, 差分线驱动器, RS422, SOIC-16
The is a quad CMOS tri-state differential Line Driver designed for digital data transmission over balanced lines. The DS26C31T meets all the requirements of EIA standard RS-422 while retaining the low power characteristics of CMOS. This enables the construction of serial and terminal interfaces while maintaining minimal power consumption. It accepts TTL or CMOS input levels and translates these to RS-422 output levels. This part uses special output circuitry that enables the drivers to power-down without loading down the bus. It has enable and disable circuitry common to all four drivers. The DS26C31 is pin compatible to the AM26LS31 and the DS26LS31. All inputs are protected against damage due to electrostatic discharge by diodes to VCC and ground.
电源电压DC 5.00 V
输出电压 1.8 V
输出电流 150 mA
供电电流 2 mA
针脚数 16
耗散功率 1226 mW
驱动器/包 4
工作温度Max 85 ℃
工作温度Min -40 ℃
电源电压 4.5V ~ 5.5V
电源电压Max 5.5 V
电源电压Min 4.5 V
安装方式 Surface Mount
引脚数 16
封装 SOIC-16
封装 SOIC-16
工作温度 -40℃ ~ 85℃
产品生命周期 Active
包装方式 Tape & Reel TR
制造应用 通信与网络
RoHS标准 RoHS Compliant
含铅标准 Lead Free
REACH SVHC标准 No SVHC
REACH SVHC版本 2015/06/15
ECCN代码 EAR99
型号/品牌 | 代替类型 | 替代型号对比 |
---|---|---|
DS26C31TMX/NOPB TI 德州仪器 | 当前型号 | 当前型号 |
DS26C31TM/NOPB 德州仪器 | 完全替代 | DS26C31TMX/NOPB和DS26C31TM/NOPB的区别 |
DS34C87TM/NOPB 德州仪器 | 类似代替 | DS26C31TMX/NOPB和DS34C87TM/NOPB的区别 |
DS26C31TN/NOPB 德州仪器 | 类似代替 | DS26C31TMX/NOPB和DS26C31TN/NOPB的区别 |