TEXAS INSTRUMENTS DAC084S085CIMM 数模转换器, 四路, 8 bit, 串行, 2.7V 至 5.5V, SOP, 10 引脚
The is a full-featured general-purpose QUAD 8-bit voltage-output Digital-to-analog Converter DAC operates from a single 2.7 to 5.5V supply and consumes 1.1mW at 3V and 2.5mW at 5V. The on-chip output amplifier allows rail-to-rail output swing and the three wire serial interface operates at clock rates up to 40MHz over the entire supply voltage range. Competitive devices are limited to 25MHz clock rates at supply voltages in the 2.7 to 3.6V range. The serial interface is compatible with standard SPI, QSPI, MICROWIRE and DSP interfaces. The reference for the DAC084S085 serves all four channels and can vary in voltage between 1V and VA, providing the widest possible output dynamic range. The DAC084S085 has a 16-bit input shift register that controls the outputs to be updated, the mode of operation, the power-down condition and the binary input data. All four outputs can be updated simultaneously or individually depending on the setting of the two modes of operation bits.
输出接口数 4
供电电流 500 µA
通道数 4
针脚数 10
位数 8
耗散功率 0.0036 W
采样率 2.50 mHz
功耗 1.10 mW
工作温度Max 105 ℃
工作温度Min -40 ℃
耗散功率Max 3.6 mW
数模转换数DAC 4
电源电压 2.7V ~ 5.5V
安装方式 Surface Mount
引脚数 10
封装 VSSOP-10
封装 VSSOP-10
工作温度 -40℃ ~ 105℃
产品生命周期 Active
包装方式 Tape & Reel TR
制造应用 便携式器材, 传感与仪器, 自动化与过程控制
RoHS标准 Non-Compliant
含铅标准 Contains Lead
REACH SVHC标准 No SVHC
REACH SVHC版本 2015/06/15
型号/品牌 | 代替类型 | 替代型号对比 |
---|---|---|
DAC084S085CIMM TI 德州仪器 | 当前型号 | 当前型号 |
DAC084S085CIMM/NOPB 德州仪器 | 完全替代 | DAC084S085CIMM和DAC084S085CIMM/NOPB的区别 |
DAC084S085CIMMX/NOPB 德州仪器 | 完全替代 | DAC084S085CIMM和DAC084S085CIMMX/NOPB的区别 |
DAC084S085CIMMX 德州仪器 | 完全替代 | DAC084S085CIMM和DAC084S085CIMMX的区别 |