TEXAS INSTRUMENTS DAC7571IDBVR 数模转换器, 12 bit, 50 kSPS, 串行, 2.7V 至 5.5V, SOT, 6 引脚
The is a low-power 1-channel 12-bit buffered voltage output Digital-to-analog Converter DAC with on-chip precision output amplifier allows rail-to-rail output swing to be achieved. The DAC7571 utilizes an I²C compatible 2-wire serial interface that operates at clock rates up to 3.4Mbps with address support of up to two DAC7571s on the same data bus. The output voltage range of the DAC is set to VDD. The DAC7571 incorporates a power-on-reset circuit that ensures that the DAC output powers up at 0V and remains there until a valid write to the device takes place. The DAC7571 contains a power-down feature, accessed via the internal control register that reduces the current consumption of the device to 50nA at 5V. The low power consumption of this part in normal operation makes it ideally suited for portable battery operated equipment. The power consumption is less than 0.7mW at 5VDD reducing to 1µW in power-down mode.
电源电压DC 5.50V max
输出接口数 1
供电电流 135 µA
通道数 1
针脚数 6
位数 12
耗散功率 0.85 mW
采样率 50 ksps
功耗 0.85 mW
过温保护 No
工作温度Max 105 ℃
工作温度Min -40 ℃
数模转换数DAC 1
电源电压 2.7V ~ 5.5V
电源电压Max 5.5 V
电源电压Min 2.7 V
安装方式 Surface Mount
引脚数 6
封装 SOT-23-6
高度 1.15 mm
封装 SOT-23-6
工作温度 -40℃ ~ 105℃
产品生命周期 Active
包装方式 Tape & Reel TR
制造应用 通信与网络, 传感与仪器, 电机驱动与控制, 自动化与过程控制, 便携式器材
RoHS标准 RoHS Compliant
含铅标准 Lead Free
REACH SVHC标准 No SVHC
REACH SVHC版本 2015/06/15
ECCN代码 EAR99
型号/品牌 | 代替类型 | 替代型号对比 |
---|---|---|
DAC7571IDBVR TI 德州仪器 | 当前型号 | 当前型号 |
DAC7571IDBVT 德州仪器 | 完全替代 | DAC7571IDBVR和DAC7571IDBVT的区别 |
DAC7571IDBVTG4 德州仪器 | 类似代替 | DAC7571IDBVR和DAC7571IDBVTG4的区别 |
DAC7571IDBVRG4 德州仪器 | 类似代替 | DAC7571IDBVR和DAC7571IDBVRG4的区别 |