DAC8562FSZ-REEL

DAC 1CH R-2R 12Bit 20Pin SOIC W T/R

Product Details

The DAC8562 is a complete, parallel input, 12-bit, voltage output DAC designed to operate from a single +5 volt supply. Built using a CBCMOS process, these monolithic DACs offer the user low cost, and ease-of-use in +5 volt only systems.

Included on the chip, in addition to the DAC, is a rail-to-rail amplifier, latch and reference. The reference REFOUT is trimmed to 2.5 volts, and the on-chip amplifier gains up the DAC output to 4.095 volts full scale. The user needs only supply a + volt supply.

The DAC8562 is coded straight binary. The op amp output swings from 0 to +4.095 volts for a one milivolt per bit resolution, and is capable of driving ±5 mA. Built using low temperature-coefficient silicon-chrome thin-film resistors, excellent linearity error versus digital input code plot.

Digital interface is parallel and high speed to the interface to the fastest processors without wait states. The interface is very simple requiring only a single CE signal. An asynchronous CLR input sets the output to zero scale.

The DAC8562 is available in tow different 20-pin packages, plastic DIP and SOL-20. Each part is fully specified for operation over -40°C to +85°C, an the full +5 V ±5 % power supply range.

For MIL-STD_883 applications, contact your local sales office for the DAC8562/883 data sheet which specifies operation over the -55°C to +125°C temperature range.

### Features and Benefits

.

Complete 12-Bit DAC

.

No External Components

.

Single +5 Volt Operation

.

1 mV/Bit with 4.095 V Full Scale

.

True Voltage Output, ±5 mA Drive

.

Very Low Power -3 mW