接口-信号缓冲器、中继器 25 Gbps Multi-Rate 8-Channel Retimer 135-FCBGA -10 to 85
The DS250DF810 is an eight-channel multi-rate Retimer with integrated signal conditioning. It is used to extend the reach and robustness of long, lossy, crosstalk-impaired high-speed serial links while achieving a bit error rate BER of 1015 or less.
Each channel of the DS250DF810 independently locks to serial data rates in a continuous range from 20.6 Gbps to 25.8 Gbps or to any supported sub-rate ÷2 and ÷4, including key data rates such as 10.3125 Gbps and 12.5 Gbps, which allows the DS250DF810 to support individual lane Forward Error Correction FEC pass-through.
Integrated physical AC coupling capacitors TX and RX eliminate the need for external capacitors on the PCB. The DS250DF810 has a single power supply and minimal need for external components. These features reduce PCB routing complexity and BOM cost.
The advanced equalization features of the DS250DF810 include a low-jitter 3-tap transmit finite impulse response FIR filter, an adaptive continuous-time linear equalizer CTLE, and an adaptive decision feedback equalizer DFE. This enables reach extension for lossy interconnect and backplanes with multiple connectors and crosstalk. The integrated CDR function is ideal for front-port optical module applications to reset the jitter budget and retime the high-speed serial data. The DS250DF810 implements 2×2 cross-point on each channel pair, providing the host with both lane crossing and fanout options.
The DS250DF810 can be configured either via the SMBus or through an external EEPROM. Up to 16 devices can share a single EEPROM. A non-disruptive on-chip eye monitor and a PRBS generator/checker allow for insystem diagnostics.
型号/品牌 | 代替类型 | 替代型号对比 |
---|---|---|
DS250DF810ABVT TI 德州仪器 | 当前型号 | 当前型号 |
DS250DF810ABVR 德州仪器 | 完全替代 | DS250DF810ABVT和DS250DF810ABVR的区别 |