DTE2048S48-D

直流/直流转换器, DIN轨, 1输出, 20 W, 48 V, 420 mA

The from is a DTE20 series 20W DC to DC converter. It is a fully encapsulated chassis mount DC to DC converter with wide 4:1 input range. The converter features short circuit protection features short circuit protection trip & restart hicc-up mode, auto recovery, overload protection and overvoltage protection. It has isolation voltage of 2500VDC for 60s, isolation resistance of 1000Mohm at 500 VDC and input to output capacitance of 2200pF. This DC to DC converter is approved by IEC60950-1, UL60950-1, CB and TUV standards.

.

Input voltage range from 18V to 75V 48V nominal voltage

.

Output voltage of 48V and output current of 0.42A

.

Input current of 35mA at no load and 0.47A at full load

.

Maximum capacitive load of 75µF and efficiency of 90%

.

Remote on/off and fitted with DIN clip

.

Initial set accuracy of ±1% and start-up delay of 50ms

.

Switching frequency of 285KHz, line regulation of ±0.5% and load regulation of 1%

.

EN55022 conducted level A with no external components

.

Dimension is 3.78inch x 2.13inch x 0.92inch 96mm x 54mm x 23.3mm and weight is 107g

.

Operating temperature range from -40°C to +85°C