EL2141CS

150MHz的差分双绞线驱动器 150MHz Differential Twisted Pair Driver

The EL2141 is a very high bandwidth amplifier whose output is in differential form, and is thus primarily targeted for applications such as driving twisted pair lines, or any application where common mode injection is likely to occur. The input signal can be in either single-ended or differential form, but the output is always in differential form.

On the EL2141, two feedback inputs provide the user with the ability to set the device gain, stable at minimum gain of two.

The output common mode level is set by the reference pin VREF, which has a -3dB bandwidth of over 100MHz. Gen erally, this pin is grounded, but it can be tied to any voltage reference.

Features

• Fully differential inputs, outputs, and feedback

• Differential input range ±2.3V

• 150MHz 3dB bandwidth

• 800V/µs slew rate

• -55dB distortion at 3MHz

• -75dB distortion at 100kHz

• ±5V supplies or +6V single supply

• 50mA minimum output current

• Output swing 200Ω load to within 1.5V of supplies

   14VPKPK differential

• Low power-11mA typical supply current

• Pb-free available RoHS compliant

Applications

• Twisted pair driver

• Differential line driver

• VGA over twisted pair

• ADSL/HDSL driver

• Single ended to differential amplification

• Transmission of analog signals in a noisy environment