FURSE ESP CCTV/B Surge Protector, Full Mode Protection, CCTV Series, Data Line, 1Outlets, 1V
The CCTV series combined category D, C, B Tested Surge Protector suitable for coaxial CCTV cables with BNC connectors or twisted pair CCTV lines ESP CCTV/T on systems with either an earthed or an isolated screen. The boundary up to LPZ0A protect against flashover through to LPZ3 to protect sensitive electronic equipment. The very low let-through voltage between all lines - Full Mode protection. The Full mode design is capable of handling partial lightning currents as well as allowing continual operation of protected equipment. The low in-line resistances are minimizing unnecessary reductions in signal strength and maximize signalling distance. The sturdy, conductive ABS housing for 2-way shielding - preventing emissions & providing signals with immunity from external interference. The ESP CCTV/T has colour coded terminals for a quick and easy installation check - grey for the dirty line end and green for the clean end.
- .
- Repeated protection in lightning intense environments
- .
- 100MHz bandwidth prevents the degradation of high frequency signals
- .
- Very low reflection coefficient/VSWR ensure that the protector doesn"t disrupt system operations
- .
- Suitable for either earthed or isolated screen systems
- .
- Convenient holes for flat mounting on base or side
- .
- Built-in DIN rail foot for easy installation on a top hat DIN rail
- .
- Substantial earth stud to enable effective earthing
- .
- Integral earthing plate for enhanced connection to earth via CME kit
- .
- ESP CCTV/B has network rail approval PA05/02510 and NRS PADS reference 086/023410
Not suitable for use on broadcast, satellite or cable TV systems.