FT201XS

FTDI  FT201XS  接口, USB, 收发器, USB 2.0, 2.97 V, 5.5 V, SSOP, 16 引脚

The is an USB 2.0 Full-speed IC, offers a compact bridge to I²C devices. The device is an I²C slave, capable of operating up to 3.4Mbps, with low power consumption 8mA. The IC includes the complete FT-X series feature set and enables USB to be added into a system design quickly and easily over an I²C interface.

.

Single chip USB to I²C interface

.

Entire USB protocol handled on chip, no USB specific firmware programming required

.

Fully integrated 2048-byte multi-time-programmable MTP memory

.

Fully integrated clock generation with no external crystal required

.

512-byte receive buffer and 512-byte transmit buffer utilising buffer smoothing technology

.

FTDI"s royalty-free virtual com port VCP and direct D2XX drivers

.

Configurable CBUS I/O pin

.

Battery charger detection

.

Device supplied pre-programmed with unique USB serial number

.

Supports bus powered, self powered and high-power bus powered USB configurations

.

Integrated +3.3V level converter for USB I/O

.

True 3.3V CMOS drive output and TTL input

.

Configurable I/O pin output drive strength

.

Integrated power-on-reset circuit

.

Internal 3.3V/1.8V LDO regulators

.

Low operating current of 8mA typical and USB suspend current of 125µA typical current

.

Low USB bandwidth consumption

.

UHCI/OHCI/EHCI host controller compatible

.

USB 2.0 full-speed compatible

.

Extended operating temperature range

ESD sensitive device, take proper precaution while handling the device.