FST32211G

四十八分之四十零位总线开关 40/48-Bit Bus Switch

General Description

The Switch FST32211 provides up to 48-bits of high-speed CMOS TTL-compatible bus switching. The low On Resistance of the switch allows inputs to be connected to outputs without adding propagation delay or generating additional ground bounce noise.

The device can be organized as four 12-bit, two 24-bit, or one 48-bit bus switch. When routed as a 40-bit bus switch, the device can be organized as four 10-bit, two 20-bit or one 40-bit bus switch. When OE1 is LOW, the switch is ON and Port 1A is connected to Port 1B. When OE2 is LOW, the switch is ON and Port 2A is connected to Port 2B. When OE3 is LOW, the switch is ON and Port 3A is connected to Port 3B. When OE4 is LOW, the switch is ON and Port 4A is connected to Port 4B. When OE1, OE2, OE3, or OE4 are HIGH, a high impedance state exists between the A and B Ports.

Features

■ 4Ω switch connection between two ports

■ Minimal propagation delay through the switch

■ Low lCC

■ Zero bounce in flow-through mode

■ Control inputs compatible with TTL level

■ Packaged in plastic Fine Pitch Ball Grid Array FBGA