CMOS低功耗欠压/过压检测器,触发电压可通过电阻调整,漏极开路输出
The is a super CMOS micropower Over-voltage/Under-voltage Detector contains two low power, individually programmable voltage detectors on a single CMOS chip. Requiring typically 3µA for operation, the device is intended for battery-operated systems and instruments which require high or low voltage warnings, settable trip points or fault monitoring and correction. The trip points and hysteresis of the two voltage detectors are individually programmed via external resistors. An internal bandgap type reference provides an accurate threshold voltage while operating from any supply in the 1.6 to 16V range. The under-voltage detector is a direct replacement for the industry standard.
电源电压DC 1.80V min
输出电压 2.00 V
输出电流 20.0 mA
供电电流 2.90 µA
阈值电压 Adjustable
复位电压Min 1.275 V
复位电压Max 1.325 V
工作温度Max 85 ℃
工作温度Min -40 ℃
电源电压Max 16 V
电源电压Min 1.8 V
安装方式 Surface Mount
引脚数 8
封装 SOIC-8
封装 SOIC-8
工作温度 -40℃ ~ 85℃ TA
产品生命周期 Active
包装方式 Each
制造应用 Power Management
RoHS标准 Non-Compliant
含铅标准 Contains Lead
REACH SVHC标准 No SVHC
REACH SVHC版本 2015/06/15
型号/品牌 | 代替类型 | 替代型号对比 |
---|---|---|
ICL7665SAIBA Intersil 英特矽尔 | 当前型号 | 当前型号 |
ICL7665SCBA 英特矽尔 | 完全替代 | ICL7665SAIBA和ICL7665SCBA的区别 |
ICL7665SACBA 英特矽尔 | 类似代替 | ICL7665SAIBA和ICL7665SACBA的区别 |