J6100G

PLUG, EBP, EURO-GERMAN; End to Ground Resistance: 1Mohm; No. of Studs: 3; Terminal Type: Stud; Colour: Yellow; No. of...

The is an Earth Bonding Point Plug with 1 x 4mm and 2 x 10mm press stud. It is designed to provide a safe effective and easy to use earthing point in an ESD protected area EPA. The plug fits into the mains supply socket, making a connection with the earth conductor only. In place of the live and neutral pins are moulded insulating plastic pins to allow positive location in the socket. Connectors on the front of the plug are available for connection via ground cords to the various elements of the EPA. Thus each element is held at a common potential, namely earth. The normal earth contact is linked via individual 1MR resistors rated at 1W to each connector on the front of the plug. In the event of a workstation element becoming live the resistor will limit the fault current to less than 0.3mA at 240V supply.

.

0.95 to 1.05MR Connector to earth pin resistance

.

2MR Connector to connector resistance approximately