--------------------DDR初始化阶段--------------------- DDR Version V1.07 20220412 //DDR bin的版本是： V1.07 对应的代码为：rkbin/bin/rk35/rk3588_ddr_lp4_2112MHz_lp5_2736MHz_v1.07.bin LPDDR4X, 2112MHz //ddr类型是LPDDR4X,最高频率2112MHz //DDR 2048年4个通道MB容量，总共8G容量 channel[0] BW=16 Col=10 Bk=8 CS0 Row=16 CS1 Row=16 CS=2 Die BW=16 Size=2048MB channel[1] BW=16 Col=10 Bk=8 CS0 Row=16 CS1 Row=16 CS=2 Die BW=16 Size=2048MB channel[2] BW=16 Col=10 Bk=8 CS0 Row=16 CS1 Row=16 CS=2 Die BW=16 Size=2048MB channel[3] BW=16 Col=10 Bk=8 CS0 Row=16 CS1 Row=16 CS=2 Die BW=16 Size=2048MB //ddr528MHz 1068MHz 1560MHz 2112MHz change to F1: 528MHz change to F2: 1068MHz change to F3: 1560MHz change to F0: 2112MHz out //DDR 初始化结束 --------------------SPL初始化阶段--------------------- U-Boot SPL board init U-Boot SPL 2017.09-gc060f28d70-220414 #zyf (Apr 18 2022 - 18:13:34) //SPL相应的代码是：rkbin/bin/rk35/rk3588_spl_v1.11.bin

//SPL阶段CPU只跑小核，大核不跑，会有下面的cpub01 cpub23报错是正常的。log Failed to set cpub01 Failed to set cpub23 查询SPI nand，如果有spi nand则从SPI nand启动 unknown raw ID phN unrecognized JEDEC id bytes: 00, 00, 00

//先从SD在卡中找到启动固件，找不到继续从EMMC找到启动固件，因为没有连接SD卡，所以会有以下错误 Trying to boot from MMC2 MMC: no card present mmc_init: -123, time 0 spl: mmc init failed with error: -123

//从emmc中加载bl31和uboot Trying to boot from MMC1 Trying fit image at 0x4000 sector Verified-boot: 0 Checking atf-1 0x00040000 … sha256(26e0c68d3d…) OK Checking uboot 0x00200000 … sha256(f000acab38…) OK Checking fdt 0x00323be0 … sha256(c07f4a4d71…) OK Checking atf-2 0x000f0000 … sha256(6a00298af8…) OK Checking atf-3 0xff100000 … sha256(33280a3988…) OK Checking atf-4 0xff001000 … sha256(2301cf73be…) OK Checking optee 0x08400000 … sha256(603cfbd25d…) OK Jumping to U-Boot(0x00200000) via ARM Trusted Firmware(0x00040000)

Total: 115.998 ms //启动到uboot总共耗时115.998ms

--------------------BL31初始化阶段--------------------- INFO: Preloader serial: 2 NOTICE: BL31: v2.3():v2.3-352-g02b68fe33:derrick.huang //BL31(trust)的版本信息 NOTICE: BL31: Built : 16:39:09, Apr 28 2022 INFO: GICv3 without legacy support detected. INFO: ARM GICv3 driver initialized in EL3 INFO: system boots from cpu-hwid-0 INFO: idle_st=0x21fff, pd_st=0x11fff9

//bl31中ddr变频频率信息 INFO: dfs DDR fsp_params[0].freq_mhz= 2112MHz INFO: dfs DDR fsp_params[1].freq_mhz= 528MHz INFO: dfs DDR fsp_params[2].freq_mhz= 1068MHz INFO: dfs DDR fsp_params[3].freq_mhz= 1560MHz INFO: BL31: Initialising Exception Handling Framework INFO: BL31: Initializing runtime services INFO: BL31: Initializing BL32 INFO: hdmirx_handler: dma not on, ret

--------------------BL32初始化阶段--------------------- I/TC: I/TC: OP-TEE version: 3.13.0-639-g8e053a881-dev #hisping.lin (gcc version 10.2.1 20201103 (GNU Toolchain for the A-profile Architecture 10.2-2020.11 (arm-10.16))) #2 Mon Mar 14 09:09:01 CST 2022 aarch64 \BL32的版本信息 I/TC: Primary CPU initializing I/TC: Primary CPU switching to normal world boot INFO: BL31: Preparing for EL3 exit to normal world INFO: Entry point address = 0x200000 INFO: SPSR = 0x3c9

--------------------UBOOT阶段--------------------- U-Boot 2017.09-g5b9a5d0dfa-220413 #wlq (Apr 28 2022 - 08:45:48 0000) //uboot的版本信息

Model: Rockchip RK3588 Evaluation Board ///显示在这里kernel的dts中定义的model = “Rockchip RK3588 EVB1 LP4 V10 Board”; PreSerial: 2, raw, 0xfeb50000 DRAM: 7.7 GiB //ddr的总容量 Sysmem: init Relocation Offset: edb53000 Relocation fdt: eb9fa8c8 - eb9fece8 CR: M/C/I Using default environment

mmc@fe2c0000: 1, mmc@fe2e0000: 0 Bootdev(atags): mmc 0 //从emmc如果是，启动SD卡启动显示在这里sdmmc MMC0: HS200, 200Mhz //emmc的速率是200Mhz HS200模式 PartType: EFI DM: v2 boot mode: reovery (misc) boot mode: normal //这是启动模式：指recovery模式或者正常的boot模式，如果是recovery模式的log是[04 28 17:52:10]boot mode: recovery (misc)。 recovery模式指的是烧写后第一次开机，或者烧写了misc后进入格式化模式；boot模式就是正常启动，没有进过recovery。 Android 12.0, Build 2022.4, v2 Found DTB in boot part DTB: rk-kernel.dtb HASH©: OK ANDROID: fdt overlay OK

//下面是uboot阶段的电源初始化情况，可以在这些log里面判断电源是否有异常。这里是双PMIC的log，后面会介绍单pmic的log spi2: RK806: 1 ON=0x00, OFF=0x00 vdd_gpu_s0 750000 uV vdd_npu_s0 750000 uV vdd_log_s0 750000 uV vdd_vdenc_s0 750000 uV vdd_gpu_mem_s0 750000 uV vdd_npu_mem_s0 750000 uV vdd_vdenc_mem_s0 750000 uV Failed to request rk8xx irq, ret=-16 spi2: RK806: 1 ON=0x00, OFF=0x00 vdd_cpu_big1_s0 750000 uV vdd_cpu_big0_s0 750000 uV vdd_cpu_lit_s0 750000 uV vdd_cpu_big1_mem_s0 750000 uV vdd_cpu_big0_mem_s0 750000 uV vdd_cpu_lit_mem_s0 750000 uV vdd_ddr_s0 850000 uV

------------------------------------------------------单PMIC log插入开始------------------------------------------------ //这里是单PMIC的log信息，这里为了说明单pmic的情况，强制加的log，正常跟上面的log不会同时出现 ANDROID: fdt overlay OK I2c0 speed: 100000Hz vsel-gpios- not found! en-gpios- not found! vdd_cpu_big0_s0 800000 uV //cpub0的电压，这路是由dcdc(rk860)供电，默认是800mv，如果电压不对需要检查供电的dcdc vsel-gpios- not found! en-gpios- not found! vdd_cpu_big1_s0 800000 uV //cpub1的电压，这路是由dcdc(rk860)供电，默认是800mv，如果电压不对需要检查供电的dcdc I2c1 speed: 100000Hz vsel-gpios- not found! en-gpios- not found! vdd_npu_s0 800000 uV //npu的电压，这路是由dcdc(rk860)供电，默认是800mv，如果电压不对需要检查供电的dcdc spi2: RK806: 2 ON=0x00, OFF=0x00 //这里是单个pmic（rk806）供电 vdd_gpu_s0 750000 uV vdd_cpu_lit_s0 750000 uV vdd_log_s0 750000 uV vdd_vdenc_s0 init 750000 uV vdd_ddr_s0 850000 uV

------------------------------------------------单PMIC log插入结束------------------------------------------------------

get vp0 plane mask:0x5, primary id:2, cursor_plane:-1, from dts get vp1 plane mask:0xa, primary id:3, cursor_plane:-1, from dts get vp2 plane mask:0x140, primary id:8, cursor_plane:-1, from dts get vp3 plane mask:0x280, primary id:9, cursor_plane:-1, from dts

Model: Rockchip RK3588 EVB1 LP4 V10 Board //这里显示的是dts的名称，可以根据这个确认固件是否烧对

Rockchip UBOOT DRM driver version: v1.0.1 vp0 have layer nr:2[0 2 ], primary plane: 2 vp1 have layer nr:2[1 3 ], primary plane: 3 vp2 have layer nr:2[6 8 ], primary plane: 8 vp3 have layer nr:2[7 9 ], primary plane: 9 disp info 2, type:16, id:0 base2_disp_info couldn’t be found, screen_info type[0] or id[0] mismatched

//显示dsi部分初始化，参数配置是kernel的dts中的参数 Using display timing dts dsi@fde20000: detailed mode clock 132000 kHz, flags[a] H: 1080 1095 1099 1129 V: 1920 1935 1937 1952 bus_format: 100e VOP update mode to: 1080x1920p0, type: MIPI0 for VP3 rockchip_vop2_init:No hdmiphypll clk0 found, use system clk rockchip_vop2_init:No hdmiphypll clk1 found, use system clk VOP VP3 enable Esmart3[654x270->654x270@213x825] fmt[2] addr[0xedf04000] final DSI-Link bandwidth: 880000 Kbps x 4

//系统clk的初始化 CLK: (uboot. arm: enter 1008000 KHz, init 1008000 KHz, kernel 0N/A) b0pll 1200000 KHz b1pll 1200000 KHz lpll 1200000 KHz v0pll 24000 KHz aupll 786215 KHz cpll 1500000 KHz gpll 1188000 KHz npll 850000 KHz ppll 1100000 KHz aclk_center_root 702000 KHz pclk_center_root 100000 KHz hclk_center_root 396000 KHz aclk_center_low_root 500000 KHz aclk_top_root 750000 KHz pclk_top_root 100000 KHz aclk_low_top_root 396000 KHz

Net: eth0: ethernet@fe1b0000 Hit key to stop autoboot(‘CTRL+C’): 0

//Android固件加载并进行AVB校验，校验固件的合法性，因为这里没有开AVB校验所以可以正常开机 ANDROID: reboot reason: “(none)” optee api revision: 2.0 Vboot=0, AVB images, AVB verify read_is_device_unlocked() ops returned that device is UNLOCKED avb_slot_verify.c:762: ERROR: vbmeta: Error verifying vbmeta image: OK_NOT_SIGNED get image from preloaded partition… ANDROID: Hash OK Could not find “system” partition Booting IMAGE kernel at 0x00400000 with fdt at 0x0a100000…

//加载kernel并跳转到kernel阶段启动 Fdt Ramdisk skip relocation Booting Android Image at 0x003ff800 … Kernel: 0x00400000 - 0x0270a808 (35883 KiB) ramdisk: 0x0a200000 - 0x0a349c9d (1320 KiB) Flattened Device Tree blob at 0x0a100000 Booting using the fdt blob at 0x0a100000 XIP Kernel Image from 0x00400000 to 0x00400000 … OK kernel loaded at 0x00400000, end = 0x0270a808 ‘reserved-memory’ cma: addr=10000000 size=10000000 Using Device Tree in place at 000000000a100000, end 000000000a143508 Adding bank: 0x00200000 - 0x08400000 (size: 0x08200000) Adding bank: 0x09400000 - 0xf0000000 (size: 0xe6c00000) Adding bank: 0x100000000 - 0x200000000 (size: 0x100000000) Total: 861.280 ms //启动到kernel阶段的耗时861.280 ms

--------------------KERNEL阶段--------------------- Starting kernel …

[ 0.981657][ T0] Booting Linux on physical CPU 0x0000000000 [0x412fd050]

//kernel的编译信息 [ 0.981677][ T0] Linux version 5.10.66 (wlq@sys2_206) (Android (7284624, based on r416183b) clang version 12.0.5 (https://android.googlesource.com/toolchain/llvm-project c935d99d7cf2016289302412d708641d52d2f7ee), LLD 12.0.5 (/buildbot/src/android/llvm-toolchain/out/llvm-project/lld c935d99d7cf2016289302412d708641d52d2f7ee)) #1918 SMP PREEMPT Thu Apr 28 08:48:34 UTC 2022 [ 0.995443][ T0] Machine model: Rockchip RK3588 EVB1 LP4 V10 Board [ 1.032098][ T0] earlycon: uart8250 at MMIO32 0x00000000feb50000 (options ‘’) [ 1.037021][ T0] printk: bootconsole [uart8250] enabled

//内存初始化信息 [ 1.045064][ T0] OF: fdt: Reserved memory: failed to reserve memory for node ‘drm-cubic-lut@00000000’: base 0x0000000000000000, size 0 MiB [ 1.046264][ T0] Reserved memory: created CMA memory pool at 0x0000000010000000, size 256 MiB [ 1.047070][ T0] OF: reserved mem: initialized node cma, compatible id shared-dma-pool [ 1.155257][ T0] Zone ranges: [ 1.155567][ T0] DMA32 [mem 0x0000000000200000-0x00000000ffffffff] [ 1.156204][ T0] Normal [mem 0x0000000100000000-0x00000001ffffffff] [ 1.156838][ T0] Movable zone start for each node [ 1.157294][ T0] Early memory node ranges [ 1.157688][ T0] node 0: [mem 0x0000000000200000-0x00000000083fffff] [ 1.158328][ T0] node 0: [mem 0x0000000009400000-0x00000000efffffff] [ 1.158968][ T0] node 0: [mem 0x0000000100000000-0x00000001ffffffff] [ 1.159609][ T0] Initmem setup node 0 [mem 0x0000000000200000-0x00000001ffffffff]

[ 1.202853][ T0] psci: probing for conduit method from DT. [ 1.203390][ T0] psci: PSCIv1.1 detected in firmware. [ 1.203879][ T0] psci: Using standard PSCI v0.2 function IDs [ 1.204425][ T0] psci: Trusted OS migration not required [ 1.204940][ T0] psci: SMC Calling Convention v1.2 [ 1.205744][ T0] percpu: Embedded 31 pages/cpu s88472 r8192 d30312 u126976 [ 1.206563][ T0] Detected VIPT I-cache on CPU0 [ 1.207023][ T0] CPU features: detected: GIC system register CPU interface [ 1.207679][ T0] CPU features: detected: Virtualization Host Extensions [ 1.208315][ T0] CPU features: detected: ARM errata 1165522, 1319367, or 1530923 [ 1.209031][ T0] alternatives: patching kernel code [ 1.211439][ T0] Built 1 zonelists, mobility grouping on. Total pages: 1995336 [ 1.212141][ T0] Kernel command line: storagemedia=emmc androidboot.storagemedia=emmc androidboot.mode=normal androidboot.dtb_idx=0 androidboot.dtbo_idx=0 androidboot.verifiedbootstate=orange androidboot.serialno=fad9d84fefa88240 console=ttyFIQ0 firmware_class.path=/vendor/etc/firmware init=/init rootwait ro loop.max_part=7 androidboot.console=ttyFIQ0 androidboot.wificountrycode=CN androidboot.hardware=rk30board androidboot.boot_devices=fe2e0000.mmc androidboot.selinux=permissive buildvariant=userdebug earlycon=uart8250,mmio32,0xfeb50000 irqchip.gicv3_pseudo_nmi=0 [ 1.217771][ T0] Dentry cache hash table entries: 1048576 (order: 11, 8388608 bytes, linear) [ 1.218927][ T0] Inode-cache hash table entries: 524288 (order: 10, 4194304 bytes, linear) [ 1.219765][ T0] mem auto-init: stack:off, heap alloc:off, heap free:off [ 1.226137][ T0] software IO TLB: mapped [mem 0x00000000e9f00000-0x00000000edf00000] (64MB) [ 1.286010][ T0] Memory: 7582960K/8108032K available (19326K kernel code, 3946K rwdata, 11208K rodata, 1344K init, 920K bss, 262928K reserved, 262144K cma-reserved) [ 1.287473][ T0] SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=8, Nodes=1 [ 1.288349][ T0] rcu: Preemptible hierarchical RCU implementation. [ 1.288945][ T0] rcu: RCU event tracing is enabled. [ 1.289427][ T0] Trampoline variant of Tasks RCU enabled. [ 1.289954][ T0] Tracing variant of Tasks RCU enabled. [ 1.290459][ T0] rcu: RCU calculated value of scheduler-enlistment delay is 30 jiffies. [ 1.294787][ T0] NR_IRQS: 64, nr_irqs: 64, preallocated irqs: 0 [ 1.297854][ T0] GICv3: GIC: Using split EOI/Deactivate mode [ 1.298403][ T0] GICv3: 480 SPIs implemented [ 1.298820][ T0] GICv3: 0 Extended SPIs implemented [ 1.299315][ T0] GICv3: Distributor has no Range Selector support [ 1.299904][ T0] GICv3: 16 PPIs implemented [ 1.300354][ T0] GICv3: CPU0: found redistributor 0 region 0:0x00000000fe680000 [ 1.301131][ T0] ITS [mem 0xfe640000-0xfe65ffff] [ 1.301622][ T0] ITS@0x00000000fe640000: allocated 8192 Devices @100100000 (indirect, esz 8, psz 64K, shr 0) [ 1.302564][ T0] ITS@0x00000000fe640000: allocated 32768 Interrupt Collections @100110000 (flat, esz 2, psz 64K, shr 0) [ 1.303580][ T0] ITS: using cache flushing for cmd queue [ 1.304115][ T0] ITS [mem 0xfe660000-0xfe67ffff] [ 1.304598][ T0] ITS@0x00000000fe660000: allocated 8192 Devices @100130000 (indirect, esz 8, psz 64K, shr 0) [ 1.305540][ T0] ITS@0x00000000fe660000: allocated 32768 Interrupt Collections @100140000 (flat, esz 2, psz 64K, shr 0) [ 1.306554][ T0] ITS: using cache flushing for cmd queue [ 1.307277][ T0] GICv3: using LPI property table @0x0000000100150000 [ 1.307986][ T0] GIC: using cache flushing for LPI property table [ 1.308574][ T0] GICv3: CPU0: using allocated LPI pending table @0x0000000100160000 [ 1.309381][ T0] kfence: initialized - using 524288 bytes for 63 objects at 0x(ptrval)-0x(ptrval) [ 1.310433][ T0] random: get_random_bytes called from start_kernel+0x268/0x500 with crng_init=0 [ 1.428451][ T0] arch_timer: cp15 timer(s) running at 24.00MHz (phys). [ 1.429880][ T0] clocksource: arch_sys_counter: mask: 0xffffffffffffff max_cycles: 0x588fe9dc0, max_idle_ns: 440795202592 ns [ 1.430921][ T0] sched_clock: 56 bits at 24MHz, resolution 41ns, wraps every 4398046511097ns [ 1.432863][ T0] Calibrating delay loop (skipped), value calculated using timer frequency… 48.00 BogoMIPS (lpj=80000) [ 1.433863][ T0] pid_max: default: 32768 minimum: 301 [ 1.434422][ T0] LSM: Security Framework initializing [ 1.434931][ T0] SELinux: Initializing. [ 1.435382][ T0] Mount-cache hash table entries: 16384 (order: 5, 131072 bytes, linear) [ 1.436146][ T0] Mountpoint-cache hash table entries: 16384 (order: 5, 131072 bytes, linear) [ 1.438530][ T1] rcu: Hierarchical SRCU implementation. [ 1.439326][ T1] Platform MSI: msi-controller@fe640000 domain created [ 1.439946][ T1] Platform MSI: msi-controller@fe660000 domain created [ 1.440870][ T1] PCI/MSI: /interrupt-controller@fe600000/msi-controller@fe640000 domain created [ 1.441694][ T1] PCI/MSI: /interrupt-controller@fe600000/msi-controller@fe660000 domain created

//CPU初始化，所有核都启动，这里如果没有启动8个核所以cpu异常，需要检查CPU供电 [ 1.443079][ T1] smp: Bringing up secondary CPUs … I/TC: Secondary CPU 1 initializing I/TC: Secondary CPU 1 switching to normal world boot I/TC: Secondary CPU 2 initializing I/TC: Secondary CPU 2 switching to normal world boot I/TC: Secondary CPU 3 initializing I/TC: Secondary CPU 3 switching to normal world boot I/TC: Secondary CPU 4 initializing I/TC: Secondary CPU 4 switching to normal world boot I/TC: Secondary CPU 5 initializing I/TC: Secondary CPU 5 switching to normal world boot I/TC: Secondary CPU 6 initializing I/TC: Secondary CPU 6 switching to normal world boot I/TC: Secondary CPU 7 initializing I/TC: Secondary CPU 7 switching to normal world boot [ 1.444709][ T0] Detected VIPT I-cache on CPU1 [ 1.444733][ T0] GICv3: CPU1: found redistributor 100 region 0:0x00000000fe6a0000 [ 1.444747][ T0] GICv3: CPU1: using allocated LPI pending table @0x0000000100170000 [ 1.444782][ T0] CPU1: Booted secondary processor 0x0000000100 [0x412fd050] [ 1.445999][ T0] Detected VIPT I-cache on CPU2 [ 1.446018][ T0] GICv3: CPU2: found redistributor 200 region 0:0x00000000fe6c0000 [ 1.446031][ T0] GICv3: CPU2: using allocated LPI pending table @0x0000000100180000 [ 1.446065][ T0] CPU2: Booted secondary processor 0x0000000200 [0x412fd050] [ 1.447227][ T0] Detected VIPT I-cache on CPU3 [ 1.447243][ T0] GICv3: CPU3: found redistributor 300 region 0:0x00000000fe6e0000 [ 1.447255][ T0] GICv3: CPU3: using allocated LPI pending table @0x0000000100190000 [ 1.447285][ T0] CPU3: Booted secondary processor 0x0000000300 [0x412fd050] [ 1.448461][ T0] CPU features: detected: Spectre-v4 [ 1.448465][ T0] Detected PIPT I-cache on CPU4 [ 1.448475][ T0] GICv3: CPU4: found redistributor 400 region 0:0x00000000fe700000 [ 1.448483][ T0] GICv3: CPU4: using allocated LPI pending table @0x00000001001a0000 [ 1.448503][ T0] CPU4: Booted secondary processor 0x0000000400 [0x414fd0b0] [ 1.449636][ T0] Detected PIPT I-cache on CPU5 [ 1.449647][ T0] GICv3: CPU5: found redistributor 500 region 0:0x00000000fe720000 [ 1.449655][ T0] GICv3: CPU5: using allocated LPI pending table @0x00000001001b0000 [ 1.449677][ T0] CPU5: Booted secondary processor 0x0000000500 [0x414fd0b0] [ 1.450829][ T0] Detected PIPT I-cache on CPU6 [ 1.450840][ T0] GICv3: CPU6: found redistributor 600 region 0:0x00000000fe740000 [ 1.450848][ T0] GICv3: CPU6: using allocated LPI pending table @0x00000001001c0000 [ 1.450869][ T0] CPU6: Booted secondary processor 0x0000000600 [0x414fd0b0] [ 1.451998][ T0] Detected PIPT I-cache on CPU7 [ 1.452009][ T0] GICv3: CPU7: found redistributor 700 region 0:0x00000000fe760000 [ 1.452017][ T0] GICv3: CPU7: using allocated LPI pending table @0x00000001001d0000 [ 1.452038][ T0] CPU7: Booted secondary processor 0x0000000700 [0x414fd0b0] [ 1.452092][ T1] smp: Brought up 1 node, 8 CPUs [ 1.470465][ T1] SMP: Total of 8 processors activated. [ 1.470957][ T1] CPU features: detected: Privileged Access Never [ 1.471525][ T1] CPU features: detected: LSE atomic instructions [ 1.472104][ T1] CPU features: detected: User Access Override [ 1.472650][ T1] CPU features: detected: 32-bit EL0 Support [ 1.473179][ T1] CPU features: detected: Common not Private translations [ 1.473810][ T1] CPU features: detected: RAS Extension Support [ 1.474363][ T1] CPU features: detected: Data cache clean to the PoU not required for I/D coherence [ 1.475205][ T1] CPU features: detected: CRC32 instructions [ 1.475754][ T1] CPU features: detected: Speculative Store Bypassing Safe (SSBS) [ 1.476450][ T1] CPU features: detected: RCpc load-acquire (LDAPR) [ 1.508138][ T1] CPU: All CPU(s) started at EL2

[ 1.510667][ T1] devtmpfs: initialized [ 1.521961][ T1] Registered cp15_barrier emulation handler [ 1.521982][ T7] Trying to unpack rootfs image as initramfs… [ 1.523034][ T1] Registered setend emulation handler [ 1.523037][ T1] KASLR disabled due to lack of seed [ 1.523100][ T1] clocksource: jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 6370867519511994 ns [ 1.524919][ T1] futex hash table entries: 2048 (order: 5, 131072 bytes, linear) [ 1.527499][ T1] pinctrl core: initialized pinctrl subsystem [ 1.528397][ T1] NET: Registered protocol family 16 [ 1.529518][ T1] DMA: preallocated 1024 KiB GFP_KERNEL pool for atomic allocations [ 1.530310][ T1] DMA: preallocated 1024 KiB GFP_KERNEL|GFP_DMA32 pool for atomic allocations [ 1.531103][ T1] audit: initializing netlink subsys (disabled) [ 1.531701][ T61] audit: type=2000 audit(0.096:1): state=initialized audit_enabled=0 res=1 [ 1.532085][ T1] thermal_sys: Registered thermal governor ‘fair_share’ [ 1.532464][ T1] thermal_sys: Registered thermal governor ‘step_wise’ [ 1.533071][ T1] thermal_sys: Registered thermal governor ‘user_space’ [ 1.533667][ T1] thermal_sys: Registered thermal governor ‘power_allocator’ [ 1.534381][ T1] thermal thermal_zone1: power_allocator: sustainable_power will be estimated [ 1.535831][ T1] thermal thermal_zone2: power_allocator: sustainable_power will be estimated [ 1.536629][ T1] thermal thermal_zone3: power_allocator: sustainable_power will be estimated [ 1.537427][ T1] thermal thermal_zone4: power_allocator: sustainable_power will be estimated [ 1.538221][ T1] thermal thermal_zone5: power_allocator: sustainable_power will be estimated [ 1.539019][ T1] thermal thermal_zone6: power_allocator: sustainable_power will be estimated [ 1.539823][ T1] cpuidle: using governor menu [ 1.540237][ T1] Registered FIQ tty driver [ 1.540714][ T1] hw-breakpoint: found 6 breakpoint and 4 watchpoint registers. [ 1.541495][ T1] ASID allocator initialised with 65536 entries [ 1.544889][ T1] printk: console [ramoops-1] enabled [ 1.545424][ T1] pstore: Registered ramoops as persistent store backend [ 1.546039][ T1] ramoops: using 0xf0000@0x110000, ecc: 0 [ 1.562139][ T7] Freeing initrd memory: 1316K [ 1.586267][ T1] rockchip-gpio fd8a0000.gpio: probed /pinctrl/gpio@fd8a0000 [ 1.587074][ T1] rockchip-gpio fec20000.gpio: probed /pinctrl/gpio@fec20000 [ 1.587866][ T1] rockchip-gpio fec30000.gpio: probed /pinctrl/gpio@fec30000 [ 1.588655][ T1] rockchip-gpio fec40000.gpio: probed /pinctrl/gpio@fec40000 [ 1.589471][ T1] rockchip-gpio fec50000.gpio: probed /pinctrl/gpio@fec50000 [ 1.590141][ T1] rockchip-pinctrl pinctrl: probed pinctrl [ 1.602962][ T1] fiq_debugger fiq_debugger.0: IRQ fiq not found [ 1.603523][ T1] fiq_debugger fiq_debugger.0: IRQ wakeup not found [ 1.604099][ T1] fiq_debugger_probe: could not install nmi irq handler [[ 1.604750][ T1] printk: console [ttyFIQ0] enabled 1.604750][ T1] printk: console [ttyFIQ0] enabled [ 1.605644][ T1] printk: bootconsole [uart8250] disabled [ 1.605644][ T1] printk: bootconsole [uart8250] disabled [ 1.606201][ T1] Registered fiq debugger ttyFIQ0 [ 1.606439][ T1] vcc5v0_sys: supplied by vcc12v_dcin [ 1.606527][ T1] vcc5v0_usbdcin: supplied by vcc12v_dcin [ 1.606607][ T1] vcc5v0_usb: supplied by vcc5v0_usbdcin [ 1.606771][ T1] vbus5v0_typec: supplied by vcc5v0_usb [ 1.606863][ T1] vcc3v3_pcie30: supplied by vcc12v_dcin [ 1.606949][ T1] vcc5v0_host: supplied by vcc5v0_usb [ 1.607484][ T1] iommu: Default domain type: Translated [ 1.607535][ T1] rk_iommu fdab9000.iommu: version = 2 [ 1.607825][ T1] rk_iommu fdb50800.iommu: version = 2 [ 1.608014][ T1] rk_iommu fdb60f00.iommu: version = 2 [ 1.608158][ T1] rk_iommu fdb70f00.iommu: version = 2 [ 1.608284][ T1] rk_iommu fdb90480.iommu: version = 2 [ 1.608431][ T1] rk_iommu fdba0800.iommu: version = 2 [ 1.608578][ T1] rk_iommu fdba4800.iommu: version = 2 [ 1.608725][ T1] rk_iommu fdba8800.iommu: version = 2 [ 1.608871][ T1] rk_iommu fdbac800.iommu: version = 2 [ 1.609017][ T1] rk_iommu fdbb0800.iommu: version = 2 [ 1.609160][ T1] rk_iommu fdbdf000.iommu: version = 2 [ 1.609361][ T1] rk_iommu fdbef000.iommu: version = 2 [ 1.609584][ T1] rk_iommu fdc38700.iommu: version = 2 [ 1.609811][ T1] rk_iommu fdc48700.iommu: version = 2 [ 1.609974][ T1] rk_iommu fdcb7f00.iommu: version = 2 [ 1.610112][ T1] rk_iommu fdce0800.iommu: version = 2 [ 1.610192][ T1] rk_iommu fdd97e00.iommu: version = 2 [ 1.610414][ T1] SCSI subsystem initialized [ 1.610476][ T1] usbcore: registered new interface driver usbfs [ 1.610489][ T1] usbcore: registered new interface driver hub [ 1.610501][ T1] usbcore: registered new device driver usb [ 1.610602][ T1] mc: Linux media interface: v0.10 [ 1.610610][ T1] videodev: Linux video capture interface: v2.00 [ 1.610628][ T1] pps_core: LinuxPPS API ver. 1 registered [ 1.610632][ T1] pps_core: Software ver. 5.3.6 - Copyright 2005-2007 Rodolfo Giometti giometti@linux.it [ 1.610638][ T1] PTP clock support registered [ 1.610817][ T1] arm-scmi firmware:scmi: SCMI Notifications - Core Enabled. [ 1.610845][ T1] arm-scmi firmware:scmi: SCMI Protocol v2.0 ‘rockchip:’ Firmware version 0x0 [ 1.611557][ T1] Advanced Linux Sound Architecture Driver Initialized. [ 1.611706][ T1] Bluetooth: Core ver 2.22 [ 1.611717][ T1] NET: Registered protocol family 31 [ 1.611720][ T1] Bluetooth: HCI device and connection manager initialized [ 1.611725][ T1] Bluetooth: HCI socket layer initialized [ 1.611729][ T1] Bluetooth: L2CAP socket layer initialized [ 1.611736][ T1] Bluetooth: SCO socket layer initialized [ 1.612956][ T1] rockchip-cpuinfo cpuinfo: SoC : 0 [ 1.612961][ T1] rockchip-cpuinfo cpuinfo: Serial : 0000000000000000 [ 1.613190][ T1] clocksource: Switched to clocksource arch_sys_counter [ 1.642551][ T1] VFS: Disk quotas dquot_6.6.0 [ 1.642580][ T1] VFS: Dquot-cache hash table entries: 512 (order 0, 4096 bytes) [ 1.642923][ T1] NET: Registered protocol family 2 [ 1.643103][ T1] IP idents hash table entries: 131072 (order: 8, 1048576 bytes, linear) [ 1.644915][ T1] tcp_listen_portaddr_hash hash table entries: 4096 (order: 4, 65536 bytes, linear) [ 1.645013][ T1] TCP established hash table entries: 65536 (order: 7, 524288 bytes, linear) [ 1.645341][ T1] TCP bind hash table entries: 65536 (order: 8, 1048576 bytes, linear) [ 1.646013][ T1] TCP: Hash tables configured (established 65536 bind 65536) [ 1.646059][ T1] UDP hash table entries: 4096 (order: 5, 131072 bytes, linear) [ 1.646188][ T1] UDP-Lite hash table entries: 4096 (order: 5, 131072 bytes, linear) [ 1.646354][ T1] NET: Registered protocol family 1 [ 1.646644][ T1] PCI: CLS 0 bytes, default 64 [ 1.647398][ T1] hw perfevents: enabled with armv8_pmuv3 PMU driver, 7 counters available [ 1.648913][ T1] Initialise system trusted keyrings [ 1.648965][ T1] workingset: timestamp_bits=46 max_order=21 bucket_order=0 [ 1.650340][ T1] utf8_selftest: All 154 tests passed [ 1.650566][ T1] Key type cifs.idmap registered [ 1.650572][ T1] fuse: init (API version 7.32) [ 1.671070][ T1] Key type asymmetric registered [ 1.671077][ T1] Asymmetric key parser ‘x509’ registered [ 1.671090][ T1] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 242) [ 1.671094][ T1] io scheduler mq-deadline registered [ 1.671100][ T1] io scheduler kyber registered [ 1.671131][ T1] io scheduler bfq registered [ 1.678557][ T1] rockchip-hdptx-phy-hdmi fed60000.hdmiphy: hdptx phy init success [ 1.679261][ T1] rockchip-hdptx-phy-hdmi fed70000.hdmiphy: hdptx phy init success [ 1.680994][ T148] rk-pcie fe180000.pcie: invalid prsnt-gpios property in node [ 1.681009][ T148] rk-pcie fe180000.pcie: no vpcie3v3 regulator found [ 1.681132][ T149] rk-pcie fe150000.pcie: invalid prsnt-gpios property in node [ 1.681141][ T148] rk-pcie fe180000.pcie: missing legacy IRQ resource [ 1.681205][ T148] rk-pcie fe180000.pcie: IRQ msi not found [ 1.681209][ T148] rk-pcie fe180000.pcie: use outband MSI support [ 1.681213][ T148] rk-pcie fe180000.pcie: Missing config reg space [ 1.681223][ T148] rk-pcie fe180000.pcie: host bridge /pcie@fe180000 ranges: [ 1.681248][ T148] rk-pcie fe180000.pcie: err 0x00f3000000…0x00f30fffff -> 0x00f3000000 [ 1.681250][ T150] rk-pcie fe170000.pcie: invalid prsnt-gpios property in node [ 1.681258][ T150] rk-pcie fe170000.pcie: no vpcie3v3 regulator found [ 1.681262][ T148] rk-pcie fe180000.pcie: IO 0x00f3100000…0x00f31fffff -> 0x00f3100000 [ 1.681278][ T148] rk-pcie fe180000.pcie: MEM 0x00f3200000…0x00f3ffffff -> 0x00f3200000 [ 1.681285][ T148] rk-pcie fe180000.pcie: MEM 0x09c0000000…0x09ffffffff -> 0x09c0000000 [ 1.681308][ T148] rk-pcie fe180000.pcie: Missing config reg space [ 1.681332][ T148] rk-pcie fe180000.pcie: invalid resource [ 1.681367][ T1] pwm-backlight backlight: supply power not found, using dummy regulator [ 1.681388][ T150] rk-pcie fe170000.pcie: missing legacy IRQ resource [ 1.681395][ T150] rk-pcie fe170000.pcie: IRQ msi not found [ 1.681399][ T150] rk-pcie fe170000.pcie: use outband MSI support [ 1.681403][ T150] rk-pcie fe170000.pcie: Missing config reg space [ 1.681408][ T150] rk-pcie fe170000.pcie: host bridge /pcie@fe170000 ranges: [ 1.681418][ T150] rk-pcie fe170000.pcie: err 0x00f2000000…0x00f20fffff -> 0x00f2000000 [ 1.681429][ T150] rk-pcie fe170000.pcie: IO 0x00f2100000…0x00f21fffff -> 0x00f2100000 [ 1.681436][ T150] rk-pcie fe170000.pcie: MEM 0x00f2200000…0x00f2ffffff -> 0x00f2200000 [ 1.681441][ T150] rk-pcie fe170000.pcie: MEM 0x0980000000…0x09bfffffff -> 0x0980000000 [ 1.681464][ T150] rk-pcie fe170000.pcie: Missing config reg space [ 1.681489][ T150] rk-pcie fe170000.pcie: invalid resource [ 1.681575][ T1] iep: Module initialized. [ 1.681600][ T1] mpp_service mpp-srv: 24995c1e48fb2 author: Ding Wei 2022-04-28 rockchip: video: mpp: Add soft reset+disable_irq before power off [ 1.681605][ T1] mpp_service mpp-srv: probe start [ 1.682602][ T1] mpp_vdpu2 fdb50400.vdpu: Adding to iommu group 1 [ 1.682801][ T1] mpp_vdpu2 fdb50400.vdpu: probe device [ 1.682880][ T1] mpp_vdpu2 fdb50400.vdpu: reset group is empty! [ 1.682884][ T1] vdpu_init:501: No aclk reset resource define [ 1.682888][ T1] mpp_vdpu2 fdb50400.vdpu: reset group is empty! [ 1.682891][ T1] vdpu_init:504: No hclk reset resource define [ 1.682964][ T1] mpp_vdpu2 fdb50400.vdpu: probing finish [ 1.683114][ T1] mpp_vepu2 jpege-ccu: probing start [ 1.683118][ T1] mpp_vepu2 jpege-ccu: probing finish [ 1.683212][ T1] mpp_vepu2 fdba0000.jpege-core: Adding to iommu group 5 [ 1.683333][ T1] mpp_vepu2 fdba0000.jpege-core: probing start [ 1.683415][ T1] mpp_vepu2 fdba0000.jpege-core: attach ccu success [ 1.683483][ T1] mpp_vepu2 fdba0000.jpege-core: probing finish [ 1.683563][ T1] mpp_vepu2 fdba4000.jpege-core: Adding to iommu group 6 [ 1.683681][ T1] mpp_vepu2 fdba4000.jpege-core: probing start [ 1.683753][ T1] mpp_vepu2 fdba4000.jpege-core: attach ccu success [ 1.683823][ T1] mpp_vepu2 fdba4000.jpege-core: probing finish [ 1.683901][ T1] mpp_vepu2 fdba8000.jpege-core: Adding to iommu group 7 [ 1.684022][ T1] mpp_vepu2 fdba8000.jpege-core: probing start [ 1.684092][ T1] mpp_vepu2 fdba8000.jpege-core: attach ccu success [ 1.684155][ T1] mpp_vepu2 fdba8000.jpege-core: probing finish [ 1.684226][ T1] mpp_vepu2 fdbac000.jpege-core: Adding to iommu group 8 [ 1.684343][ T1] mpp_vepu2 fdbac000.jpege-core: probing start [ 1.684412][ T1] mpp_vepu2 fdbac000.jpege-core: attach ccu success [ 1.684474][ T1] mpp_vepu2 fdbac000.jpege-core: probing finish [ 1.684676][ T1] mpp-iep2 fdbb0000.iep: Adding to iommu group 9 [ 1.684795][ T1] mpp-iep2 fdbb0000.iep: probe device [ 1.684887][ T1] mpp-iep2 fdbb0000.iep: allocate roi buffer failed [ 1.684945][ T1] mpp-iep2 fdbb0000.iep: probing finish [ 1.685105][ T1] mpp_jpgdec fdb90000.jpegd: Adding to iommu group 4 [ 1.685295][ T1] mpp_jpgdec fdb90000.jpegd: probe device [ 1.685432][ T1] mpp_jpgdec fdb90000.jpegd: probing finish [ 1.685708][ T1] mpp_rkvdec2 fdc30000.rkvdec-ccu: rkvdec-ccu, probing start [ 1.685752][ T1] mpp_rkvdec2 fdc30000.rkvdec-ccu: probing finish [ 1.685820][ T1] mpp_rkvdec2 fdc38100.rkvdec-core: Adding to iommu group 12 [ 1.686051][ T1] mpp_rkvdec2 fdc38100.rkvdec-core: rkvdec-core, probing start [ 1.686137][ T1] mpp_rkvdec2 fdc38100.rkvdec-core: shared_niu_a is not found! [ 1.686141][ T1] rkvdec2_init:697: No niu aclk reset resource define [ 1.686145][ T1] mpp_rkvdec2 fdc38100.rkvdec-core: shared_niu_h is not found! [ 1.686148][ T1] rkvdec2_init:700: No niu hclk reset resource define [ 1.686172][ T1] rkvdec2_resume:1309: fdc38100.rkvdec-core [ 1.686202][ T1] mpp_rkvdec2 fdc38100.rkvdec-core: core_mask=00010001 [ 1.686206][ T1] mpp_rkvdec2 fdc38100.rkvdec-core: attach ccu as core 0 [ 1.686391][ T1] mpp_rkvdec2 fdc38100.rkvdec-core: sram_start 0x00000000fd601000 [ 1.686395][ T1] mpp_rkvdec2 fdc38100.rkvdec-core: rcb_iova 0x0000000010000000 [ 1.686399][ T1] mpp_rkvdec2 fdc38100.rkvdec-core: sram_size 491520 [ 1.686403][ T1] mpp_rkvdec2 fdc38100.rkvdec-core: rcb_size 1048576 [ 1.686435][ T1] mpp_rkvdec2 fdc38100.rkvdec-core: min_width 512 [ 1.686457][ T1] mpp_rkvdec2 fdc38100.rkvdec-core: probing finish [ 1.686515][ T1] mpp_rkvdec2 fdc48100.rkvdec-core: Adding to iommu group 13 [ 1.686728][ T1] mpp_rkvdec2 fdc48100.rkvdec-core: rkvdec-core, probing start [ 1.686810][ T1] mpp_rkvdec2 fdc48100.rkvdec-core: shared_niu_a is not found! [ 1.686814][ T1] rkvdec2_init:697: No niu aclk reset resource define [ 1.686818][ T1] mpp_rkvdec2 fdc48100.rkvdec-core: shared_niu_h is not found! [ 1.686821][ T1] rkvdec2_init:700: No niu hclk reset resource define [ 1.686844][ T1] rkvdec2_resume:1309: fdc48100.rkvdec-core [ 1.686863][ T1] mpp_rkvdec2 fdc48100.rkvdec-core: core_mask=00020002 [ 1.686879][ T1] mpp_rkvdec2 fdc48100.rkvdec-core: attach ccu as core 1 [ 1.687083][ T1] mpp_rkvdec2 fdc48100.rkvdec-core: sram_start 0x00000000fd679000 [ 1.687087][ T1] mpp_rkvdec2 fdc48100.rkvdec-core: rcb_iova 0x0000000010100000 [ 1.687091][ T1] mpp_rkvdec2 fdc48100.rkvdec-core: sram_size 487424 [ 1.687094][ T1] mpp_rkvdec2 fdc48100.rkvdec-core: rcb_size 1048576 [ 1.687098][ T1] mpp_rkvdec2 fdc48100.rkvdec-core: min_width 512 [ 1.687119][ T1] mpp_rkvdec2 fdc48100.rkvdec-core: probing finish [ 1.687280][ T1] mpp_rkvenc2 rkvenc-ccu: probing start [ 1.687284][ T1] mpp_rkvenc2 rkvenc-ccu: probing finish [ 1.687379][ T1] mpp_rkvenc2 fdbd0000.rkvenc-core: Adding to iommu group 10 [ 1.687539][ T1] mpp_rkvenc2 fdbd0000.rkvenc-core: probing start [ 1.687552][ T1] mpp_rkvenc2 fdbd0000.rkvenc-core: link mode task capacity 8 [ 1.687663][ T1] mpp_rkvenc2 fdbd0000.rkvenc-core: attach ccu as core 0 [ 1.687735][ T1] mpp_rkvenc2 fdbd0000.rkvenc-core: probing finish [ 1.687788][ T1] mpp_rkvenc2 fdbe0000.rkvenc-core: Adding to iommu group 11 [ 1.687996][ T1] mpp_rkvenc2 fdbe0000.rkvenc-core: probing start [ 1.688009][ T1] mpp_rkvenc2 fdbe0000.rkvenc-core: link mode task capacity 8 [ 1.688133][ T1] mpp_rkvenc2 fdbe0000.rkvenc-core: attach ccu as core 1 [ 1.688199][ T1] mpp_rkvenc2 fdbe0000.rkvenc-core: probing finish [ 1.688592][ T1] mpp_av1dec: Adding child /av1d@fdc70000 [ 1.688769][ T1] mpp_av1dec: register device av1d-master [ 1.688783][ T1] mpp_av1dec av1d-master: av1_iommu_of_xlate,784 [ 1.688799][ T1] av1_iommu_probe_device,737, consumer : av1d-master, supplier : fdca0000.iommu [ 1.688805][ T1] mpp_av1dec av1d-master: Adding to iommu group 17 [ 1.689028][ T1] mpp_av1dec av1d-master: probing start [ 1.689178][ T1] mpp_av1dec av1d-master: probing finish [ 1.689204][ T1] mpp_service mpp-srv: probe success [ 1.696591][ T1] dma-pl330 fea10000.dma-controller: Loaded driver for PL330 DMAC-241330 [ 1.696599][ T1] dma-pl330 fea10000.dma-controller: DBUFF-128x8bytes Num_Chans-8 Num_Peri-32 Num_Events-16 [ 1.697255][ T1] dma-pl330 fea30000.dma-controller: Loaded driver for PL330 DMAC-241330 [ 1.697262][ T1] dma-pl330 fea30000.dma-controller: DBUFF-128x8bytes Num_Chans-8 Num_Peri-32 Num_Events-16 [ 1.697553][ T149] rk-pcie fe150000.pcie: missing legacy IRQ resource [ 1.697564][ T149] rk-pcie fe150000.pcie: IRQ msi not found [ 1.697569][ T149] rk-pcie fe150000.pcie: use outband MSI support [ 1.697573][ T149] rk-pcie fe150000.pcie: Missing config reg space [ 1.697580][ T149] rk-pcie fe150000.pcie: host bridge /pcie@fe150000 ranges: [ 1.697591][ T149] rk-pcie fe150000.pcie: err 0x00f0000000…0x00f00fffff -> 0x00f0000000 [ 1.697599][ T149] rk-pcie fe150000.pcie: IO 0x00f0100000…0x00f01fffff -> 0x00f0100000 [ 1.697608][ T149] rk-pcie fe150000.pcie: MEM 0x00f0200000…0x00f0ffffff -> 0x00f0200000 [ 1.697614][ T149] rk-pcie fe150000.pcie: MEM 0x0900000000…0x093fffffff -> 0x0900000000 [ 1.697643][ T149] rk-pcie fe150000.pcie: Missing config reg space [ 1.697672][ T149] rk-pcie fe150000.pcie: invalid resource [ 1.697921][ T1] dma-pl330 fed10000.dma-controller: Loaded driver for PL330 DMAC-241330 [ 1.697927][ T1] dma-pl330 fed10000.dma-controller: DBUFF-128x8bytes Num_Chans-8 Num_Peri-32 Num_Events-16 [ 1.698618][ T1] rockchip-pvtm fda40000.pvtm: pvtm@0 probed [ 1.698662][ T1] rockchip-pvtm fda50000.pvtm: pvtm@1 probed [ 1.698699][ T1] rockchip-pvtm fda60000.pvtm: pvtm@2 probed [ 1.698734][ T1] rockchip-pvtm fdaf0000.pvtm: pvtm@3 probed [ 1.698768][ T1] rockchip-pvtm fdb30000.pvtm: pvtm@4 probed [ 1.699083][ T1] rockchip-system-monitor rockchip-system-monitor: system monitor probe [ 1.699739][ T1] Serial: 8250/16550 driver, 10 ports, IRQ sharing disabled [ 1.700135][ T1] febb0000.serial: ttyS8 at MMIO 0xfebb0000 (irq = 90, base_baud = 1500000) is a 16550A [ 1.700625][ T173] random: fast init done [ 1.700677][ T173] random: crng init done [ 1.701263][ T1] rockchip-vop2 fdd90000.vop: Adding to iommu group 16 [ 1.707103][ T1] rockchip-vop2 fdd90000.vop: [drm:vop2_bind] vp0 assign plane mask: 0x5, primary plane phy id: 2 [ 1.707113][ T1] rockchip-vop2 fdd90000.vop: [drm:vop2_bind] vp1 assign plane mask: 0xa, primary plane phy id: 3 [ 1.707126][ T1] rockchip-vop2 fdd90000.vop: [drm:vop2_bind] vp2 assign plane mask: 0x140, primary plane phy id: 8 [ 1.707133][ T1] rockchip-vop2 fdd90000.vop: [drm:vop2_bind] vp3 assign plane mask: 0x280, primary plane phy id: 9 [ 1.718900][ T1] rockchip-drm display-subsystem: bound fdd90000.vop (ops vop2_component_ops) [ 1.719432][ T1] dwhdmi-rockchip fde80000.hdmi: registered ddc I2C bus driver [ 1.719581][ T1] rockchip-drm display-subsystem: bound fde80000.hdmi (ops dw_hdmi_rockchip_ops) [ 1.720091][ T1] dwhdmi-rockchip fdea0000.hdmi: registered ddc I2C bus driver [ 1.720222][ T1] rockchip-drm display-subsystem: bound fdea0000.hdmi (ops dw_hdmi_rockchip_ops) [ 1.720254][ T1] dw-mipi-dsi2 fde20000.dsi: [drm:dw_mipi_dsi2_bind] ERROR Failed to find panel or bridge: -517 [ 1.725634][ T1] panel-simple-dsi fde20000.dsi.0: failed to get power regulator: -517 [ 1.729680][ T1] brd: module loaded [ 1.734520][ T1] loop: module loaded [ 1.734673][ T1] zram: Added device: zram0 [ 1.734783][ T1] system_heap: orders[0] = 6 [ 1.734787][ T1] system_heap: orders[1] = 4 [ 1.734790][ T1] system_heap: orders[2] = 0 [ 1.735095][ T1] SCSI Media Changer driver v0.25 [ 1.735631][ T1] ahci fe210000.sata: supply ahci not found, using dummy regulator [ 1.735686][ T1] ahci fe210000.sata: supply phy not found, using dummy regulator [ 1.735788][ T1] ahci fe210000.sata: supply target not found, using dummy regulator [ 1.735849][ T1] ahci fe210000.sata: forcing port_map 0x0 -> 0x1 [ 1.735869][ T1] ahci fe210000.sata: AHCI 0001.0300 32 slots 1 ports 6 Gbps 0x1 impl platform mode [ 1.735878][ T1] ahci fe210000.sata: flags: ncq sntf pm led clo only pmp fbs pio slum part ccc apst [ 1.735886][ T1] ahci fe210000.sata: port 0 can do FBS, forcing FBSCP [ 1.736649][ T1] scsi host0: ahci [ 1.736761][ T1] ata1: SATA max UDMA/133 mmio [mem 0xfe210000-0xfe210fff] port 0x100 irq 79 [ 1.737587][ T1] rockchip-spi feb20000.spi: no high_speed pinctrl state