RT9080-33GJ5

LDO电压稳压器, 固定, 1.2 V至5.5 V输入, 3.3 V/600 mA输出, 310 mV压差, TSOT-23-5

The from is a 600mA low dropout LDO linear regulator without SNS output voltage sense pin in 5 pin TSOT-23 package. This regulator with enable function operates from 1.2V to 5.5V. It provides up to 600mA of output current and offers low power operation in miniaturized packaging. The features of low quiescent current as low as 2µA and almost zero disable current is ideal for powering the battery equipment to a longer service life. The RT9080 is stable with the ceramic output capacitor over its wide input range from 1.2V to 5.5V and the entire range of output load current 0mA to 600mA. The minimum required output capacitance for stable operation is 1µF effective capacitance after consideration of the temperature and voltage coefficient of the capacitor.

.

2µA ground current at no Load

.

Power supply rejection ratio PSRR of 75dB at 1KHz

.

Fixed output voltage of 3.3V and DC output accuracy of ±2% at ILOAD = 1mA

.

600mA VIN >= 2.3V output current with EN and low 0.1µA disable current

.

Current limit protection, overtemperature protection, stable with ceramic or tantalum capacitor

.

Dropout voltage of 0.31V at 600mA

.

VCC consumption current of 2µA and shutdown GND current of 0.1µA

.

Output voltage noise of 42µVRMS COUT = 1µF, ILOAD = 150mA, BW = 10Hz to 100KHz, VIN = VOUT + 1V

.

Line regulation of 0.13% at ILOAD = 1mA and load regulation of 0.5% at 1mA < ILOAD < 600mA

.

Ambient temperature range from -40°C to 85°C

ESD sensitive device. Handling precautions are recommended.