FH33-14S-0.5SH

0.4mm，则0.5mm时， 1mm节距， 1.2毫米板，柔性线路板及柔性扁平电缆ZIF连接器上方 0.4mm,0.5mm,1mm Pitch, 1.2mm above the board, Flexible Printed Circuit & Flexible Flat Cable ZIF Connectors

■Features

1\. Low-profile, small PCB mounting area

Narrow width of only 2.5 mm reduced the board footprint by approximately 17% to 57%, as compared to several similar FH Series HRS connectors.

2\. Various contact pitch 0.4mm, 0.5mm, 1mm pitch available

In addition to standard 0.5mm pitch, 0.4mm pitch, 1mm pitch also available.

3\. Increased FPC/FFC retention force

 -In the horizontal direction: Approximately 2.0 times compared to 0.5mm pitch FH12 series.

 -In the vertical direction: Approximately 1.7 times compared to 0.5mm pitch FH19 series.

4\. Conductive traces on the PCB can run under the connector

No exposed contacts on the bottom of the connector.

5\. One finger operation of the actuator

Proven in several other Hirose’s connectors Flip-Lock® rotating actuator assures reliable mechanical and electrical connection with FPC/FFC, confirming it with a definite tactile feel.

6\. Easy FPC insertion and reliable electrical connection

Proven Flip Lock actuator allows easy insertion of FPC/FFC and provides a tactile sensation when fully closed, confirming complete electrical and mechanical connection.

7\. Accepts standard FPC thickness

0.3mm thick standard Flexible Printed Circuit FPC and Flexible Flat Cable FFC can be used.

8\. Board placement with automatic equipment

Flat upper surface and tape and reel packaging facilitate vacuum pick-up and placement. Standard reel packaging contains 5000 connectors.

9\. Halogen-freeFH33J Series

As defined by IEC61249-2-21

Br-900ppm maximum, Cl-900ppm maximum, Cl + Br combined-1,500ppm maximum