AM26LV32EMDREP

TEXAS INSTRUMENTS  AM26LV32EMDREP.  芯片, RS-422接收器, 32MSPS, 3.3V, SOIC-16

The is a quad low-voltage high-speed differential Line Receiver with 3-state outputs. This differential receiver has ±15kV ESD HBM and IEC61000-4-2, air-gap discharge and ±8kV ESD IEC61000-4-2, contact discharge protection for RS422 bus pins. This device is designed to meet A/EIA-422-B and ITU recommendation V.11 driver with reduced supply voltage. The device is optimized for balanced bus transmission at switching rates up to 32MHz. The 3-state outputs permit connection directly to a bus-organized system. It has an internal fail-safe circuitry that prevents the device from putting an unknown voltage signal at the receiver outputs. In the open fail-safe, shorted fail-safe and terminated fail-safe, a high state is produced at the respective output. This device is supported for partial-power-down applications using IOFF. IOFF circuitry disables the outputs, preventing damaging current backflow-through the device when it is powered down.

.

Open-circuit, short-circuit and terminated failsafe

.

Pin-to-Pin-compatible with AM26C32 and AM26LS32

.

IOFF supports partial-power-down mode operation

.

Accepts 5V logic inputs with 3.3V supply enable inputs

.

27mW Typical low power dissipation

.

±7V Common-mode input voltage range

.

±200mV Sensitivity

.

35mV Typical input hysteresis

.

Green product and no Sb/Br