750-352

现场总线耦合器, 以太网, 750系列, 数字和模拟信号, 10/100mbit

The from Wago is a light grey colour 10/100Mbit/s Ethernet fieldbus coupler. This coupler connects Ethernet to modular Wago I/O system. It automatically configures and creates local process image which may include analogue, digital or specialty modules. Analogue and specialty module data is sent via words or bytes and digital data is sent bit by bit. Two Ethernet interfaces and an integrated switch allow fieldbus to be wired in a line topology. This eliminates additional network devices such as switches or hubs. Both interfaces support auto negotiation and auto‐MDIX. The coupler is designed for fieldbus communication in both Ethernet/IP and MODBUS networks. It also supports a wide variety of standard Ethernet protocols HTTP, BootP, DHCP, DNS, SNMP, FTP. The coupler has an integrated supply terminal for system voltage. The field power jumper contacts are supplied via a separate supply module.

.

64 I/O modules

.

Configuration via PC and 2 x RJ45  bus coupler connections 

.

Power supply voltage of 24VDC -25% to 30%

.

Typical input current of 280mA at 24V rated load

.

Dimension is 50mm x 65mm x 97mm W x H x L

.

Total current for I/O modules is 700mA at 5V

.

Approved by UL 508, CE, ANSI/ISA 12.12.01 and ATEX/IECEx standards

.

CAGE CLAMP connection technology and 35mm DIN rail mounting

.

IP20 degree of protection

.

Operating temperature range from 0°C to 55°C 

The device is equipped with electronic components that may be destroyed by electrostatic discharge when touched. Please observe safety precautions as per DIN EN 61340-5-1/-3 while handling the device.

All power sources to the device shall be switched off prior to performing any installation, repair or maintenance work.