MAX3243EIRHBR

3V至5.5V多通道RS - 232线路驱动器/接收器【 15千伏IEC ESD保护 3-V TO 5.5-V MULTICHANNEL RS-232 LINE DRIVER/RECEIVER WITH 【15-kV IEC ESD PROTECTION

The is a RS-232 multichannel Line Driver/Receiver with ±15kV ESD HBM and IEC61000-4-2, air-gap discharge and ±8kV ESD IEC61000-4-2, contact discharge protection on serial-port connection pins. The device meets the requirements of A/EIA-232-F and provides the electrical interface between an asynchronous communication controller and the serial-port connector. This combination of drivers and receivers matches that needed for the typical serial port used in an IBM PC/AT or compatible. The charge pump and four small external capacitors allow operation from a single 3 to 5.5V supply. In addition, the device includes an always-active non-inverting output ROUT2B, which allows applications using the ring indicator to transmit data while the device is powered down. The device operates at data signalling rates up to 250kB and a maximum of 30V/µs driver output slew rate. Flexible control options for power management are available when the serial port is inactive.

.

Single-chip and single-supply interface for IBM PC/AT serial port

.

Serial-mouse driveability

.

Auto-power-down feature to disable driver outputs when no valid RS-232 signal is sensed

.

Designed to be interchangeable with Maxim MAX3243E

.

Designed to transmit at a data rate up to 500kbps

.

1µA Typical Low standby current

.

Green product and no Sb/Br