ESP CCTV/B

FURSE ESP CCTV/B Surge Protector, Full Mode Protection, CCTV Series, Data Line, 1Outlets, 1V

The CCTV series combined category D, C, B Tested Surge Protector suitable for coaxial CCTV cables with BNC connectors or twisted pair CCTV lines ESP CCTV/T on systems with either an earthed or an isolated screen. The boundary up to LPZ0A protect against flashover through to LPZ3 to protect sensitive electronic equipment. The very low let-through voltage between all lines - Full Mode protection. The Full mode design is capable of handling partial lightning currents as well as allowing continual operation of protected equipment. The low in-line resistances are minimizing unnecessary reductions in signal strength and maximize signalling distance. The sturdy, conductive ABS housing for 2-way shielding - preventing emissions & providing signals with immunity from external interference. The ESP CCTV/T has colour coded terminals for a quick and easy installation check - grey for the dirty line end and green for the clean end.

.

Repeated protection in lightning intense environments

.

100MHz bandwidth prevents the degradation of high frequency signals

.

Very low reflection coefficient/VSWR ensure that the protector doesn"t disrupt system operations

.

Suitable for either earthed or isolated screen systems

.

Convenient holes for flat mounting on base or side

.

Built-in DIN rail foot for easy installation on a top hat DIN rail

.

Substantial earth stud to enable effective earthing

.

Integral earthing plate for enhanced connection to earth via CME kit

.

ESP CCTV/B has network rail approval PA05/02510 and NRS PADS reference 086/023410

Not suitable for use on broadcast, satellite or cable TV systems.