IMD - 6-digit display, current, voltage6-digit digital display, 14 mm character height For standard signals and other DC voltages IMD1 or DC currents IMD2 Freely and easily scalable Can be supplied with various options H x W x D: 48 x 96 x 174 mm ### Power supply115 / 230 Vac / 14 VA ### BodyPlastic with zinc diecast front frame IP65 from front ### DimensionsComplies with DIN 48 x 96 x 174 mm H x W x D Control panel cut-out 45 x 92 mm H x W ### Option SV sensor power18 Vdc/max. 60 mA ### Option GW 2 limit valuesRelay 5A @ 230 Vac and transistor NPN-OC, max. 100 mA @ 30 Vdc for one output available Programmable as limit value with hysteresis, continuous signal or pulse signal **Signal input:** | | | ---|---|---|--- **IMD1: range can be configured using wire jumper, Impedance: 1 MΩ** | | | Input | Accuracy | Resolution | ±2 Vdc | 0.025 % | 0.1 mV | ±20 Vdc | 0.1% | 1 mV | ±200 Vdc | 0.1% | 10 mV | ±300 Vdc | 0.1% | 100 mV | **IMD2: range can be configured using wire jumper** | | | Input | Impedance Ω | Accuracy | Resolution ±0.22 mA | 1000 | 0.1% | 0.01 μA ±2 mA | 100 | 0.1% | 0.1 μA ±20 mA | 10 | 0.025 % | 1 μA ±200 mA | 1 | 0.15 % | 10 μA ±2 A | 0.1 | 0.5% | 100 μA **Display:** 6-digit, 14.2 mm high LED display, freely scalable using front panel keys, freely configurable decimal point | | | ### 过程指示器
This series of enclosures is designed for applications requiring a water resistant instrument enclosure. These rugged enclosures are fabricated of formed steel with all seams welded to withstand NEMA 4/IP65 wash-down applications. The kits are coated with a durable flat black polyurethane finish. Electrical connections to the enclosed instrument are easily made through a removable access panel at the rear of the enclosure. The panel can be drilled to accept conduit fittings or other types of wiring connectors. The enclosures can be mounted free-standing or securely fastened to a mounting surface with brackets which are provided with each enclosure. The brackets also allow the enclosures to be raised and/or tilted from the mounting surface in order to achieve the most favorable operating position. Self-stick rubber pads are provided which can be applied to the bottom of the enclosure. These rubber pads will protect the mounting surface and are particularly useful for free-standing installations.