INFC 2000

EA ELEKTRO-AUTOMATIK INFC 2000 Uninterruptible Power Supply UPS, Tower, 2kVA / 1.2kW, 6Outlets, 230V, 230V, 4 min, 473mm

The is a 4-outlet 1.2kW Uninterruptible Power Supply UPS provide an uninterruptible power source for critical equipment to cover failures in the mains supply. The units can protect connected systems against power failure, undervoltage and overvoltage. The units work with the line interactive principle in the voltage independent category. The output voltage is stabilized and filtered by passing the input power through a converter with buck-and-boost switching. At the same time DC current is generated to charge the accumulators. In case of a power failure these accumulators provide power via the converter to the connected loads. The units are fused to protect both the unit and the user equipment against overload or short-circuit and have an overload protection with automatic cut-off. During mains operation, the output is thus cut after 5 minutes if the output load is 100 to 110% or immediately at >110%.

.

Line interactive principle

.

UPS classification VI-SS-222 according IEC 62040-3

.

Pure sine wave output for any critical load

.

Boost and buck converter with automatic voltage

.

Advanced intelligent battery management

.

Short recharge time for batteries

.

User friendly LCD panel

.

Soft start for critical loads

.

Short-circuit, overload and deep discharge protection

.

Fault alerts and status warnings

.

Output voltage displayed on the LCD panel

.

Cold start and energy saving features

.

Compact size and user friendly operation