LT3092ETS8#PBF

LINEAR TECHNOLOGY  LT3092ETS8#PBF  芯片, 可编程电流源, 0.2A, 8SOT23

The is a programmable 2-terminal Current Source. It requires only two resistors to set an output current between 0.5 and 200mA. A multitude of analogue techniques lend themselves to actively programming the output current. It is stable without input and output capacitors, offering high DC and AC impedance. This feature allows operation in intrinsically safe applications. The SET pin features 1% initial accuracy and low temperature coefficient. Current regulation is better than 10ppm/V from 1.5 to 40V. It can operate in a 2-terminal current source configuration in series with signal lines.

.

200mA Maximum Output Current

.

1.2 to 40V Wide Input Voltage Range

.

Input/Output Capacitors Not Required

.

Resistor Ratio Sets Output Current

.

1% Initial Set Pin Current Accuracy

.

Reverse-voltage Protection

.

Reverse-current Protection

.

<0.001%/V Line Regulation Typical

.

Current Limit and Thermal Shutdown Protection

.

Lead-free Finish