TPS2413

N1和的ORing电源导轨控制器 N1 and ORing Power Rail Controller

The TPS2412/13 controller, in conjunction with an external N-channel MOSFET, emulates the function of a low forward voltage diode. The TPS2412/13 can be used to combine multiple power supplies to a common bus in an N+1 configuration, or to combine redundant input power buses. The TPS2412 provides a linear turnon control while the has an on/off control method.

Applications for the TPS2412/13 include a wide range of systems including servers and telecom. These applications often have either N+1 redundant power supplies, redundant power buses, or both. Redundant power sources must have the equivalent of a diode OR to prevent reverse current during faults and hotplug. A TPS2412/13 and N-channel MOSFET provide this function with less power loss than a schottky diode.

Accurate voltage sensing and a programmable turnoff threshold allows operation to be tailored for a wide range of implementations and bus characteristics. The TPS2412/13 are lower pin count, reduced feature versions of the TPS2410/11.

.

Control External FET for N+1 and ORing

.

Wide Supply Voltage Range of 3 V to 16.5 V

.

Controls Buses From 0.8 V to 16.5 V

.

Linear or On/Off Control Method

.

Internal Charge Pump for N-Channel MOSFET

.

Rapid Device Turnoff Protects Bus Integrity

.

Positive Gate Control on Hot Insertion

.

Soft Turnon Reduces Bus Transients

.

Industrial Temperature Range: –40°C to 85°C

.

8-Pin TSSOP and SOIC Packages