CBTW28DD14AETJ

CBTW28DD14 - 14Bit bus switch/multiplexer for DDR2/DDR3/DDR4 applications BGA 48Pin

Overview

This 14-bit bus switch/multiplexer MUX is designed for 1.5 V or 1.8 V supply voltage operation, POD_12, SSTL_12, SSTL_135, SSTL_15 or SSTL_18 signaling and CMOS select input levels. It is designed for operation in DDR2, DDR3 or DDR4 memory bus systems.

The CBTW28DD14 has a 1 : 2 switch or 2 : 1 multiplex topology and offers a 14-bit wide bus. Each 14-bit wide A-port can be switched to one of two ports B and C, for all bits simultaneously. The selection of the port is by a simple CMOS input SELect. Another CMOS input ENable is available to allow all ports to be disconnected. Each port is non-directional due to the use of FET switches, allowing a multitude of applications requiring high-bandwidth switching or multiplexing.

The SEL and EN input signals are designed to operate transparently as CMOS input level signals in both 1.5 V and 1.8 V supply voltage conditions.

CBTW28DD14 uses proprietary high-speed switch architecture providing high bandwidth, very little insertion loss at low frequency, and very low propagation delay, allowing use in many applications requiring switching or multiplexing of high-speed signals. It is available in a 4.5 mm x 4.5 mm TFBGA48 package with 0.5 mm ball pitch, for optimal size versus board layout density considerations. It is characterized for operation from -10 °C to +85 °C.

MoreLess

## Features

### Topology

* 14-bit bus width

* 1 : 2 switch/MUX topology

* Bidirectional operation

* Simple CMOS select pin SEL

* Simple CMOS enable pin EN

### Performance

* 2.5 GHz bandwidth

* Low ON insertion loss

* Low crosstalk

* High OFF isolation

* POD_12, SSTL_12, SSTL_135, SSTL_15 or SSTL_18 signaling

* Low RON 10 Ω typical

### General attributes

* 1.5 V or 1.8 V supply voltage operation

* Very low supply current 300 μA typical

* ESD robustness exceeds 3 kV HBM, 1 kV CDM

* Available in TFBGA48 package, 4.5 mm × 4.5 mm × 0.8 mm size, 0.5 mm pitch, Pb-free/Dark Green

## Target Applications

* DDR2/DDR3/DDR4 memory bus systems

* Systems requiring high-speed multiplexing

## Features