WEICONLOCK AN 302-43,20ML

Adhesive, Medium Strength, Methacrylate Ester, Pen Applicator, Blue, 20 ml

The WEICONLOCK AN 302-43, 20ML is an Anaerobic Adhesive/Sealant on the basis of special methacrylate resins, especially made for economical threadlocking, retaining and sealing of threaded, cylindrical and pipe assemblies. Pre-treatment of the surface in general, WEICONLOCK does not require special pre-treatment as slightly oily surfaces e.g. on as received parts will be tolerated. However, best results will be achieved on cleaned, degreased parts use WEICON Surface Cleaner. If required, the parts should be slightly roughened. Processing - WEICONLOCK is ready for use and should be applied evenly direct from the bottle/tube with the dispensing tip avoid direct contact of dispensing tip with metal. On press fitted parts and larger cylindrical assemblies a thin and uniform layer should be applied on both surfaces. In the case of threaded blind holes fill sufficient quantity in the bore hole. On screws and bolts, apply WEICONLOCK around the thread.

.

Threadlocking, KTW/DVGW approved

.

Medium strength

.

High viscosity

.

Normal to disassemble

.

For threaded joints up to M36

.

-60 to +150°C Temperature resistance range

Generally do not cause allergic reactions of the skin. However, in isolated cases where skin is continuously bruised or micro-lacerated sensitisation may occur.