TPD4S214EVM

TPD4S214EVM概述

USB OTG Companion Device Evaluation Module

The provides full functionality of TPD4S214. Dependent on the jumper configurations, VOTG_IN can be supplied through either the USB Type-A connector labeled USB_IN or the banana jack labeled VOTG_IN. VBUS can be output to either the Micro USB-B connector labeled USB_OUT or a two pin terminal block labeled VBUS_OUT. This configuration allows the device to be tested without the use of expensive breakout boards; yet one or two breakout boards can still be accommodated. D+/D- lines can only be characterized through the USB connectors. Test points are provided for monitoring the DET, EN, and FLT logic pins. VBUS current limiting adjustments are made by jumper selection of ADJ_SEL. R3 is left unpopulated to allow for a custom user preferred value.

TPD4S214EVM数据文档
型号 品牌 下载
TPD4S214EVM

TI 德州仪器

下载
TPD4S014DSQR

TI 德州仪器

下载
TPD4E001DRSR

TI 德州仪器

下载
TPD4E001DPKT

TI 德州仪器

下载
TPD4S009DGSR

TI 德州仪器

下载
TPD4E05U06DQAR

TI 德州仪器

下载
TPD4E002DRL2

TI 德州仪器

下载
TPD4E1U06DBVR

TI 德州仪器

下载
TPD4S009DCKRG4

TI 德州仪器

下载
TPD4E1B06DRLR

TI 德州仪器

下载
TPD4E05U06QDQARQ1

TI 德州仪器

下载

锐单商城 - 一站式电子元器件采购平台