24通道，12位PWM LED驱动器 24-Channel, 12-Bit PWM LED Driver with
The is a 24-channel, constant-current sink LED driver. Each channel is individually adjustable with 4096 pulse-width modulated PWM steps. PWM control is repeated automatically with the programmed grayscale GS data. GS data are written via a serial interface port. The current value of all 24 channels is set by a single external resistor.
The TLC5947 has a thermal shutdown TSD function that turns off all output drivers during an over-temperature condition. All of the output drivers automatically restart when the temperature returns to normal conditions.
-
.
-
24 Channels, Constant-Current Sink Output
-
.
-
30-mA Capability Constant-Current Sink
-
.
-
12-Bit 4096 Steps PWM Grayscale Control
-
.
-
LED Power-Supply Voltage Up to 30 V
-
.
-
VCC = 3.0 V to 5.5 V
-
.
-
Constant-Current Accuracy:
-
.
-
Channel-to-Channel = ±2% Typical
-
.
-
Device-to-Device = ±2% Typical
-
.
-
CMOS Logic Level I/O
-
.
-
30-MHz Data Transfer Rate Standalone
-
.
-
15-MHz Data Transfer Rate Cascaded Devices,
SCLK Duty = 50%
-
.
-
Shift Out Data Changes With Falling Edge to
Avoid Data Shift Errors
-
.
-
Auto Display Repeat
-
.
-
4-MHz Internal Oscillator
-
.
-
Thermal Shutdown TSD:
-
.
-
Automatic Shutdown at OverTemperature Conditions
-
.
-
Restart Under Normal Temperature
-
.
-
Noise Reduction:
-
.
-
4-Channel Grouped Delay to Prevent Inrush Current
-
.
-
Operating Temperature: 40°C to 85°C