缓冲器和线路驱动器 1 to 4bit Address
This 1-bit to 4-bit address driver is designed for 1.65-V to 3.6-V VCC operation.
The SN74ALVCH162344 is used in applications in which four separate memory locations must be addressed by a single address.
The outputs, which are designed to sink up to 12 mA, include equivalent 26- resistors to reduce overshoot and undershoot.
To ensure the high-impedance state during power up or power down, the output-enable OE\ inputs should be tied to VCC through a pullup resistor; the minimum value of the resistor is determined by the current-sinking capability of the driver.
Active bus-hold circuitry holds unused or undriven inputs at a valid logic state. Use of pullup or pulldown resistors with the bus-hold circuitry is not recommended.
型号 | 品牌 | 下载 |
---|---|---|
SN74ALVCH162344VR | TI 德州仪器 | 下载 |
SN74CB3T3383DW | TI 德州仪器 | 下载 |
SN74CBT16212ADLRG4 | TI 德州仪器 | 下载 |
SN74CB3T3383DWR | TI 德州仪器 | 下载 |
SN74CBTLV3383PW | TI 德州仪器 | 下载 |
SN74CBT16212AZQLR | TI 德州仪器 | 下载 |
SN74CBT3383DBQR | TI 德州仪器 | 下载 |
SN74CB3T3383PW | TI 德州仪器 | 下载 |
SN74CBTLV3383PWE4 | TI 德州仪器 | 下载 |
SN74CBT3383DBR | TI 德州仪器 | 下载 |
SN74CB3T3383PWR | TI 德州仪器 | 下载 |