TLV271IDBVT

TEXAS INSTRUMENTS  TLV271IDBVT  运算放大器, 单路, 3 MHz, 1个放大器, 2.4 V/µs, ± 1.35V 至 ± 8V, SOT-23, 5 引脚

低电压 BiMOS/BiCMOS ，TLV/LMV 系列

得捷:
IC CMOS 1 CIRCUIT SOT23-5

欧时:
Texas Instruments 运算放大器 TLV271IDBVT 精确, 3MHz增益带宽积, 5 V单电源电压, 5引脚 SOT-23封装

德州仪器TI:
Single, 16-V, 3-MHz operational amplifier

e络盟:
运算放大器, 单路, 1个放大器, 3 MHz, 2.4 V/µs, ± 1.35V 至 ± 8V, SOT-23, 5 引脚

艾睿:
Op Amp Single Low Power Amplifier R-R O/P ±8V/16V 5-Pin SOT-23 T/R

安富利:
OP Amp Single GP R-R O/P ±8V/16V 5-Pin SOT-23 T/R

Chip1Stop:
Low Power550-uA/Ch 3-MHz Rail-to-Rail Output Operational Amplifier OP Amp Single GP R-R O/P ±8V/16V 5-Pin SOT-23 T/R

Verical:
Op Amp Single Low Power Amplifier R-R O/P ±8V/16V 5-Pin SOT-23 T/R

Newark:
The TLV271IDBVT is a 3MHz Rail-to-rail Output Operational Amplifier that takes the minimum operating supply voltage down to 2.7V over the extended industrial temperature range. This makes it an ideal alternative to the TLC271 for applications where rail-to-rail output swings are essential. The TLV271 also provides 3MHz bandwidth from only 550µA. The TLV271 is fully specified for 5 and ±5V supplies. The maximum recommended supply voltage is 16V, which allows the devices to be operated from a variety of rechargeable cells ±8V supplies down to ±1.35V. The CMOS inputs enable use in high-impedance sensor interfaces, with the lower voltage operation making an attractive alternative for the TLC271 in battery-powered applications. The 2.7V operation makes it compatible with Li-ion powered systems and the operating supply voltage range of many micropower microcontrollers available today including MSP430.

DeviceMart:
IC OPAMP GP R-R 3MHZ SGL SOT23-5