X1226S8ZT1

实时时钟/日历与EEPROM Real Time Clock/Calendar with EEPROM

Real Time Clock/Calendar with EEPROM

DESCRIPTION

The X1226 device is a Real Time Clock with clock/calendar, two polled alarms with integrated 512x8 EEPROM, oscillator compensation, and battery backup switch. The oscillator uses an external, low-cost 32.768kHz crystal. All compensation and trim components are integrated on the chip. This eliminates several external discrete components and a trim capacitor, saving board area and component cost.

FEATURES

• Real Time Clock/Calendar

   —Tracks time in Hours, Minutes, and Seconds

   —Day of the Week, Day, Month, and Year

• 2 Polled Alarms Non-volatile

   —Settable on the Second, Minute, Hour, Day of the Week, Day, or Month

   —Repeat Mode periodic interrupts

• Oscillator Compensation On Chip

   —Internal feedback resistor and compensation capacitors

   —64 position Digitally Controlled Trim Capacitor

   —6 digital frequency adjustment settings to ±30ppm

• Battery Switch or Super Cap Input

• 512 x 8 Bits of EEPROM

   —64-Byte Page Write Mode

   —8 modes of Block Lock™ Protection

   —Single Byte Write Capability

• High Reliability

   —Data Retention: 100 years

   —Endurance: 100,000 cycles per byte

• 2-Wire™ Interface Interoperable With I2C

   —400kHz data transfer rate

• Frequency Output SW Selectable: Off, 1Hz, 4096Hz or 32.768kHz

• Low Power CMOS

   —1.25µA Operating Current Typical

• Small Package Options

   —8 Ld SOIC and 8 Ld TSSOP

• Repetitive Alarms

• Temperature Compensation

• Pb-Free Plus Anneal Available RoHS Compliant

APPLICATIONS

• Utility Meters

• HVAC Equipment

• Audio / Video Components

• Set Top Box / Television

• Modems

• Network Routers, Hubs, Switches, Bridges

• Cellular Infrastructure Equipment

• Fixed Broadband Wireless Equipment

• Pagers / PDA

• POS Equipment

• Test Meters / Fixtures

• Office Automation Copiers, Fax

• Home Appliances

• Computer Products

• Other Industrial / Medical / Automotive