ADA8282WBCPZ-R7

AFE General Purpose 4ADC 12Bit 3.3V 32Pin LFCSP T/R

Product Details

The ADA8282 is designed for applications that require low cost, low power, compact size, and flexibility. The ADA8282 has four parallel channels, each including a low noise preamplifier LNA and a programmable gain amplifier PGA. The LNA and PGA combine to form a signal chain that features a gain range of 18 dB to 36 dB in 6 dB increments with a guaranteed minimum bandwidth of 5 MHz.

Using the highest power settings, the combined input referred voltage noise of the combined LNA and PGA channel is 3.4 nV/√Hz at maximum gain.

The ADA8282 can be configured in four power modes that trade off power and noise performance to optimize the performance according to the end application.

Fabricated in an advanced complementary metal-oxide semiconductor CMOS process, the ADA8282 is available in a 5 mm × 5 mm, RoHS-compliant, 32-lead LFCSP. It is specified over the automotive temperature range of −40°C to +125°C.

Applications

.

Automotive radar

Adaptive cruise control

Collision avoidance

Blind spot detection

Self parking

Electronic bumper

### Features and Benefits

.

4 channels of low noise amplifiers LNA followed by programmable gain amplifiers PGA

.

Minimum −3 dB bandwidth of 5 MHz

.

Typical –3 dB bandwidth of 42.3 MHz

.

Typical slew rate of 28 V/µs

.

Differential input and output

.

Gain of 18 dB to 36 dB in 6 dB steps

.

Selectable low noise and low power modes

Input referred noise of 4.5 nV/√Hz at 18.3 mW per channel

Input referred noise of 3.6 nV/√Hz at 34.8 mW per channel

Input referred noise of 3.4 nV/√Hz at 54.8 mW per channel

.

Qualified for automotive applications

.

See data sheet for additional features