DM303007

开发板和工具包 - PIC / DSPIC KEELOQ 3 Development Kit

This low-cost demo board is for evaluation of our PIC18 MCU families. The PIC18 is our highest performance 8-bit architecture and has three different families: standard PIC18, PIC18 J-series and PIC18 K-series. This single development board supports dozens of the general-purpose PIC18 families using various processor Plug-In Modules PIMs. PICtail daughter boards enable many different accessory boards to connect to the PIC18 Explorer board for a flexible and complete development environment. This board is the ideal complement to the MPLAB® PICkit 3 or ICD 3 debugger and programmer for a full-featured, economical, PIC18 development environment.

.

*Features:**

* Multiple PIC18 processors, both a PIC18F8722 on board 128KB Flash, 80 pins, superset of traditional PIC18 family, and a PIC18F87J11 Plug-In Module 128KB Flash, 80-pins, superset of J-series, PIM adjusts to accommodate 3 V device. A switch selects the desired processor.

* Supports many other PIC18 devices with Plug-In Modules, supporting 28 to 80-pin PIC18 devices

* PICtail ™ daughter board connector for connection to standard expansion boards such as Ethernet, speech playback, and the many different sensors

* Expansion connector accesses full device pin-out and breadboard prototype area

* Convenient connection for MPLAB PICkit 3, ICD 3 or REAL ICE for in-circuit programming and debugging

* Alpha-numeric LCD display

* USB interface for USB to RS-232 communication

* 25LC256 SPI EEPROM

* Crystal oscillator

* Potentiometer connected to 10-bit A/D, analog input channel

* Analog output temperature sensor

* LEDs

* RS-232 port

* Power supply connector and programmable voltage regulator, capable of operation from 2.0 V to 5.5 V

* Demo software including temperature sensor demo included illustrates "s analog temperature sensor MPC9701A and 32 kHz crystal for Real Time Clock demonstration