ATEVK1070B

Capacitance Touch Sensor AT42QT1070 with USB Evaluation KitCapacitance Touch Sensor Demonstration Kit using the AT42QT1070 sensor controller Evaluation board has a serial USB interface allowing connection to a computer QT1070 demonstration computer software for control and data viewing The board operates in comms mode and can have 1 to 7 keys One key can be used as a guard key ### Kit ContentsEVK1070B Evaluation Board USB Cable EVK1070B Quickstart Guide ### 人机接口 HMI，Atmel

The is a USB connected board, that has to have the pregenerated code set-up in the computer. The kit is USB powered and features 6 buttons, a guard channel, and at least 2-LED"s. The EVK1070B can be connected directly to a PC via USB or user application via an I2C compatible bus. The EVK1070B is configured to allow setup of 1 to 7 keys or 1 to 6 keys plus a Guard channel. The AT42QT1070 QT1070 is a digital burst mode charge transfer capacitive sensor driver. The device can sense from one to seven keys, dependent on mode. The QT1070 has the optimized architecture where no external components are required and only 1pin per channel. It includes all signal processing functions necessary to provide stable sensing under a wide variety of changing conditions, and the outputs are fully debounced. The QT1070 modulates its bursts in a spread spectrum fashion in order to heavily suppress the effects of external noise, and to suppress RF emissions.

.

6 buttons

.

Guard channel

.

Two LED"s

.

Patented spread spectrum charge transfer technology

.

Panel thickness of up to 10mm glass and up to 5mm plastic electrode size dependent

.

Key sensitivity can be individually settable via simple commands over I2C compatible interface

.

I2C compatible slave mode 400KHz. Discrete detection outputs

.

Self calibration, Auto drift compensation, Noise filtering, Adjacent key suppression