仪器放大器评估模块
The is intended to provide basic functional evaluation of the INA827. The INA827 is a low cost instrumentation amplifier that offers extremely low power consumption and operates over a very wide single or dual supply range. The device is optimized for the lowest possible gain drift of only 1ppm per degree Celsius in G = 5, which requires no external resistor. However, a single external resistor sets any gain from 5 to 1000. The INA827 is optimized to provide excellent common mode rejection ratio of over 88 dB G = 5 over frequencies up to 5kHz. In G = 5, CMRR exceeds 88dB across the full input common-mode range from the negative supply all the way up to 1V of the positive supply. Using a rail to rail output, the INA827 is well suited for low voltage operation from a 2.7V single supply as well as dual supplies up to ±18V. Additional circuitry protects the inputs against overvoltage of up to ±40 V beyond the power supplies by limiting the input currents to a save level.
It is important to operate this EVM within the input voltage range of -18V to 17V and the output voltage range of -14V to 14V. Exceeding the specified input range may cause damage to the EVM.
型号 | 品牌 | 下载 |
---|---|---|
INA827EVM | TI 德州仪器 | 下载 |
INA826EVM | TI 德州仪器 | 下载 |
INA826AIDR | TI 德州仪器 | 下载 |
INA827AIDGKR | TI 德州仪器 | 下载 |
INA826AIDRGT | TI 德州仪器 | 下载 |
INA827AIDGK | TI 德州仪器 | 下载 |
INA826AID | TI 德州仪器 | 下载 |
INA826AIDGK | TI 德州仪器 | 下载 |
INA826AIDRGR | TI 德州仪器 | 下载 |
INA826SIDRCR | TI 德州仪器 | 下载 |
INA826SIDRCT | TI 德州仪器 | 下载 |