CBTL06DP213EE,118

模拟多路复用器/解复用器, 1:2, 6电路, 14ohm, 3V至3.6V电源, TFBGA-48

Overview

CBTL06DP213 is an third generation high-performance multi-channel multiplexer, meant for DisplayPort DP v1.3 or Embedded DisplayPort applications operating at data rate of 1.62 Gbit/s, 2.7 Gbit/s, 5.4 Gbit/s or 8.1 Gbit/s. It is designed using NXP proprietary high-bandwidth pass-gate technology and it can be used for 1 : 2 switching or 2 : 1 multiplexing of four high-speed differential AC-coupled DP channels. Further, it is capable of switching/multiplexing of Hot Plug Detect HPD signal as well as Auxiliary AUX and Display Data Channel DDC signals. In order to support GPUs/CPUs that have dedicated AUX and DDC I/Os, CBTL06DP213 provides an additional level of multiplexing of AUX and DDC signals delivering true flexibility and choice.

A typical application of CBTL06DP213 is on motherboards where one of two GPU DisplayPort sources needs to be selected to connect to a DisplayPort sink device or connector. A controller chip selects which path to use by setting a select signal HIGH or LOW. Due to the bidirectional nature of the signal paths, CBTL06DP213 can also be used in the reverse topology, for example, to connect one display source device to one of two display sink devices or connectors.

MoreLess

## Features

* 1 : 2 switching or 2 : 1 multiplexing of DisplayPort v1.3 - 8.1 Gbit/s signals

* 4 high-speed differential channels with 2 : 1 multiplexing/switching for DisplayPort main link signals

* 1 channel with 4 : 1 multiplexing/switching for AUX or DDC signals

* 1 channel with 2 : 1 multiplexing/switching for HPD signal

* High-bandwidth analog pass-gate technology

* Ron on DP high-speed channels: 14 Ω

* Low insertion loss:

* \\- 0.9 dB at 100 MHz

* \\- 1.3 dB at 2.7 GHz

* \\- 1.7 dB at 4 GHz

* \\- 3 dB at 11.1 GHz

* Low crosstalk: -35 dB at 2.7 GHz

* Low off-state isolation: -30 dB at 2.7 GHz, -25 dB at 4 GHz

* Low return loss:

* \\- 20.3 dB at 100 MHz

* \\- 16.7 dB at 1.35 GHz

* \\- 12.9 dB at 2.7 GHz

* \\- 12 dB at 4 GHz

* Very low intra-pair skew 5 ps typical

* Very low inter-pair skew < 80 ps

* Switch/multiplexer position select CMOS input

* DDC and AUX ports tolerant to being pulled to +5 V via 2.2 kΩ resistor

* Supports HDMI/DVI incorrect dongle connection

* Single 3.3 V power supply

* Operation current of 2 mA typical,

* ESD 2 kV HBM, 500 V CDM

* Available in 5 mm x 5 mm, 0.5 mm ball pitch TFBGA48 package

## Features