电压保护与自动电池平衡2节串联锂离子电池 Voltage Protection with Automatic Cell Balance for 2-Series Cell Li-Ion Batteries
The bq2920x device is a secondary overvoltage protection IC for 2-series cell lithium-ion battery packs that incorporates a high-accuracy precision overvoltage detection circuit and automatic cell imbalance correction.
The voltage of each cell in a 2-series cell battery pack is compared to a factory programmed internal reference voltage. If either cell reaches an overvoltage condition, the OUT pin changes from low to high state.
The bq2920x can perform automatic voltage-based cell imbalance correction. Balancing can start when the cell voltages are different by nominally 30 mV or more and stops when the difference is nominally 0 mV. Cell balancing is enabled and disabled by the CB_EN pin.
型号 | 品牌 | 下载 |
---|---|---|
BQ29200DRBR | TI 德州仪器 | 下载 |
BQ294502EVM-033 | TI 德州仪器 | 下载 |
BQ29700EVM-610 | TI 德州仪器 | 下载 |
BQ29410DCTT | TI 德州仪器 | 下载 |
BQ294602DRVT | TI 德州仪器 | 下载 |
BQ2954SN | TI 德州仪器 | 下载 |
BQ29700DSET | TI 德州仪器 | 下载 |
BQ294604DRVR | TI 德州仪器 | 下载 |
BQ294682DRVR | TI 德州仪器 | 下载 |
BQ294602DRVR | TI 德州仪器 | 下载 |
BQ29703DSER | TI 德州仪器 | 下载 |