RCLAMP3654P

SEMTECH  RCLAMP3654P  TVS二极管, TVS, RailClamp系列, 5.5 V, 30 V, SLP1616P6, 6 引脚

The RailClamp series ultra-low capacitance TVS Array designed to protect high speed data interfaces. It is specifically designed to protect sensitive components which are connected to high-speed data and transmission lines from overvoltage caused by ESD electrostatic discharge, CDE Cable Discharge Events and EFT electrical fast transients. The device has a typical capacitance of only 0.50pF pin 1 to 2, used on circuits operating in excess of 3GHz without signal attenuation. It is used to meet the ESD immunity requirements of IEC 61000-4-2, level 4 ±15kV air, ±8kV contact discharge. Each device can be configured to protect 1 bidirectional line or two unidirectional lines. It is designed for use in applications where board space is at a premium. The combination of small size, low capacitance and high level of ESD protection makes them a flexible solution for applications such as HDMI, MDDI, antenna circuits, Automatic Test Equipment, USB 2.0 and InfiniBand circuits.

.

Designed to replace polymer TVS

.

Protects up to two I/O lines

.

<1pF Ultra-Low capacitance

.

No insertion loss to >3.0GHz

.

Low leakage current and clamping voltage

.

Solid-state silicon-avalanche technology

.

-55 to 125°C Operating temperature range