BB-BONE-CAM3-01

CIRCUITCO  BB-BONE-CAM3-01  开发板, BEAGLEBONE系列, 附加摄像头3.1MP

is a BeagleBone 3.1MP Camera Cape provides a portable camera solution for BeagleBone. Each Camera Cape is composed of a Sensor board and an Expansion board. The Sensor board carries a 3.1 megapixel camera sensor and transmits captured image data to the Expansion board over camera interface CAM I/F. The Expansion board features a CSSP bridge connectivity device, which stores image data received from Sensor board and transfers them to the AM335x using general purpose memory controller GPMC interface.

.

Camera sensor 1/4 inch 3.1 megapixel Aptina MT9T111

.

CAM I/F, GPMC data interface

.

Power 3.3V/5V via expansion header

.

Two power LED indicators

.

Two 46 position BeagleBone connectors

.

One 10 position BeagleBone connector

.

Two pairs of 30 position Sensor board connectors

.

One 28 position camera sensor socket

.

Four layer board

.

EEPROM Support

BeagleBone 3.1MP Camera Cape should be used with LCD7 Cape or DVI-D Cape for previewing and capturing photos.