RM35LM33MW

Level control relays RM35 L The level control relays RM35 LM33MW and RM35 LV14MW control one or two levels, filling or draining function: RM35 LM33MW: control by resistive level sensor. RM35 LV14MW: control by “On/Off” sensor. Fitted with a clear hinged front flap to prevent any accidental alteration of settings. LED display of output status. Fitting on DIN Rail. 认可 UL, CSA, GL, C-Tick, GOST 标准 NF EN 60255-6 and IEC 60255-6 导电料面探针控制器继电器 液位继电器用于监测导电液体的液位，且提供向上/向下、最小、最大和灌注/排空变型。 液位继电器可直接安装且使用安全。 **Application Examples Liquid Level Relays Conductive Level Sensors are used in a wide variety of applications including waste water management and the monitoring and management of corrosive liquid media, and designed specifically to provide for the: Monitoring and control of liquid levels Protection of pumps against dry running Ability to detect liquid leaks in a system Control of media mixing ratios Control of liquid levels

RM35-L 液位控制继电器

Zelio RM35L 系列液位控制继电器用于一个或两个液位等级，带注满或放空功能。 通过控制泵或阀操作调节液位，还适用于保护浸入式泵，防止其空转，或防止罐体过流。 前面板上的透明铰接盖可避免设置意外更改。

LED 指示

35 mm DIN 导轨安装

通过电阻探头检测

欧时:
Schneider Electric DIN导轨安装 液位控制继电器 RM35LM33MW, 20.4 → 264 V 交流/直流 电源

Allied Electronics:
Electric DIN Rail Mount Level Controller; 20.4 to 264 V ac/dc; 76 x 35 x 90mm

TME:
Module: level monitoring relay; 24÷240VAC; DIN; OUT1:250VAC/5A

Verical:
Electromechanical Relay 24 to 240VDC 24 to 240VAC 5A DPDT90x35x72mm DIN Rail Liquid Level Control Relay