BQ24170EVM-610-15V

评估板, BQ24170同步开关模式锂离子与锂聚合物电池充电器

The evaluation module helps designers evaluate the operation and performance of the bq24170 synchronous battery charger. The bq24170 is highly integrated stand alone lithium ion and lithium polymerise switch mode battery charger with two integrated N-channel power MOSFETs. It offers a constant frequency synchronous PWM controller with high accuracy regulation of input current, charge current, and voltage. It closely monitors the battery pack temperature to allow charge only in a preset temperature window. It also provides battery detection, pre-conditioning, charge termination, and charge status monitoring. A programmable charge timer offers a safety back up. The bq24170 automatically restarts the charge cycle if the battery voltage falls below an internal threshold, and enters a low quiescent current sleep mode when the input voltage falls below the battery voltage. The EVM is also called the HPA610 -002.

.

Stand alone synchronous switch mode, battery charge controller

.

Integrated N-MOSFETs and power path selector

.

CELL pin setting to select between 1, 2, or 3 Li ion batteries with 4.2V/cell

.

Input operating range: 6V to 18V

.

LED indication for charge status

.

Test points for key signals available for testing purposes, easy probe hook-up

.

Jumpers available; easy to change setting

ESD precautions must be followed while handling electronic assemblies and performing test.

It is important to operate this EVM within the input voltage range of 0V to 20V and the output voltage range of 0V to 12.6V