RF Amplifier BL Smart Antenna Solutions
Overview
The BGU8309 is, also known as the GPS1401M, a low current Low Noise-Amplifier LNA for GNSS receiver applications. The BGU8309 is available in a small plastic 5-pin extremely thin leadless package. The BGU8309 requires only one external matching inductor and is optimized for higher IP3i performance.
The BGU8309 adapts itself to the changing environment resulting from co-habitation of different radio systems in modern cellular handsets. It has been designed for ultra low power consumption and optimal performance when jamming signals from co-existing cellular transmitters are present. At low jamming power levels, it delivers 17 dB gain at a noise figure of 0.65 dB and a supply current of 3.6 mA. During high jamming power levels, resulting for example from a cellular transmit burst, it temporarily increases its bias current to improve sensitivity.
MoreLess
## Features
* Out of band IP3i of 5 dBm
* Optimized performance at a low supply current of 3.6 mA
* Covers full GNSS L1 band, from 1559 MHz to 1610 MHz
* Noise figure = 0.7 dB
* Gain 17 dB
* Input 1 dB compression point of ‒9 dBm
* Supply voltage 1.5 V to 3.1 V
* Integrated supply decoupling capacitor
* Power-down mode current consumption < 1 µA
* Integrated temperature stabilized bias for easy design
* Requires only one input matching inductor
* RF input and RF output are AC coupled through internal DC blocking caps
* ESD protection on all pins HBM > 2 kV
* Integrated matching for the output
* Available in a 5-pins leadless package 0.8 mm x 0.8 mm x 0.35 mm: SOT1226-2
* 180 GHz transit frequency - SiGe:C technology
* Moisture sensitivity level 1
## Target Applications
* LNA for GPS, GLONASS
* Galileo and Compass BeiDou in smart phones
* Feature phones
* Tablet PCs
* Digital still cameras
* Digital video cameras
* RF front-end modules
* Complete GNSS modules
* Wearable applications
## Features